Jump to content
SAU Community

Recommended Posts

Hi guys,

I have already sold the Z33... and these pole position seats are actually off the car for sale....

THey will come with Recaro special side adaptors, geniune Recaro rails for Z33 (if you don't want that, it is fine too with a different price), Recaro driver side lumper support. I will also throw in a pair of Nismo airbag sensor plugs for the Z33, so you will not have the airbag warning light and the rest of the airbags in the car will still work properly!

The side adaptors that I am using are specially made by Recaro Australia (not shown in the photos), it looks a lot better and neater than those in the photos... I have those ones in the photos sitting around too, but the seating position is way too high for all of us.... so Recaro Australia specially made those side adaptors for me (of course with extra money) and the seating position is at the stock position now.

Pole position seats are slightly wider than those normal SP-G seats... Porsche GT3/2 seats are actually made based on the pole position SP-G seats, just with a different upper design...

These seats can be engineered and approved for the road use... I have done that with proof/receipt from Burwood Vicroad... so there is no problem with other States I believe!

Each seat is about 11KG (including rails and adaptors)...

Here are some photos of those seats....

pp1.JPG

pp2.JPG

pp3.JPG

pp4.JPG

pp5.JPG

pp6.JPG

pp7.JPG

Brand New Price: $AU 5,000.00

Asking for $AU 3,200.00 for a pair...o.n.o. (with Z33 rails)

Asking for $AU 2,800.00 for a pair... o.n.o. (without Z33 rails, but still comes with side adaptors)

cheers,

richie

Edited by nismo350z

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...