Jump to content
SAU Community

Recommended Posts

Does anyone know where i can get these side skirts and rear bar i think there Bn i know the car in pic is from viva garage but i want to buy from somewhere else they dont exactly have the best reputation for good fitting kits. I would also like to buy in adelaide.

EDIT: Couldnt get pics to work but its the pics on page 1 post number 2 posted by ADZ2332

Edited by iLEC
explain to me why in drift comps > formula D for example, why do they take there wings off to drift when doing the sharper turned courses?, and im talking about silvia's with 400hp and less ..

???? and back on when doing more straight courses?

To put it simply, once the car goes past about 15 to 30 degrees of angle, the wing offers negligible downforce, and more drag. so on sharper bend courses, where there's more angle and not enough space to reach any speed, they're more of a hindrance than a help

One of the best looking fronts is a s2 front bar with the nismo lip

Theres a pic of a r33 with one on it on these forums but i can't

find it at the moment ;)!

It has the fog lamps removed and is hecka sexy!

That + The gtr grill.

That's the front bar im going for now just need too decide what

skirts and rear bar :laugh:!

Hows every one feel instead of the steath wing to lift the boot lik an R34 so its flush with ur sides ?

im just pondering where to lift my R33 boot and put a gt wing on or leave it it and just angle the wing ?? ne comments

Edited by WikidR33
Hows every one feel instead of the steath wing to lift the boot lik an R34 so its flush with ur sides ?

im just pondering where to lift my R33 boot and put a gt wing on or leave it it and just angle the wing ?? ne comments

Don't rate the flush sitting boots personally. I would leave it.

Each to their own.

I have spent quite some time since buying my s2 r33 late last year looking for a kit i like. I finally found 1. It is by Final Konnexian in Japan.

My concern is it seems to be for the s1... will the front fit my s2 if i get a grill too? Will the sides and rear fit?

what people think of the kit overall?

post-33642-1179364229_thumb.jpg

post-33642-1179364353_thumb.jpg

I love the kit, its what I want to fit to mine. luckily I have an S1 so I'm not sure about the fitment to S2. Cant remember who sells these kits in Aus but if you find the distributor they should be able to tell you about the fitment between the two series.

I love the kit, its what I want to fit to mine. luckily I have an S1 so I'm not sure about the fitment to S2. Cant remember who sells these kits in Aus but if you find the distributor they should be able to tell you about the fitment between the two series.

Jetspeed QLD is apparently the only official/licenced distributor of the kit. Is good price too i think so is on the shopping list.

They told me i only need a grill and it will fit s2, but i wanted to check this with people here to see if that advice is correct...???

I have spent quite some time since buying my s2 r33 late last year looking for a kit i like. I finally found 1. It is by Final Konnexian in Japan.

My concern is it seems to be for the s1... will the front fit my s2 if i get a grill too? Will the sides and rear fit?

what people think of the kit overall?

post-33642-1179364229_thumb.jpg

post-33642-1179364353_thumb.jpg

Hey mate

that is a very nice looking kit my mate had that on his series one 33 just a bit of a heads up though with that front bar he was scraping out everywhere (car wasnt lowered) eventually cracked rite through it and replaced it with the trust front bar which looks pretty tough with these skirts and rear. Also im not completely sure but i would look into weather or not its gona fit properly with a series 2 bonnet before you buy it. Let us know how you go good luck

hey guys what do you think of the monkey warehouse m-sports kit? i thik they are great this is my car i rekon it looks awsome and it still has the stocko s1 wing. what do use think any good

Rate the skirts and rear bar, not the front bar though.

I am looking at buying genuine final konnexion kit (minus front bar) or genuine Msports kit (with series II front bar).

Still deciding..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Robertson was a Canadian inventor, and it absolutely reigns supreme here. 95% of our screws are Roberston. It's literally the only option you can buy off store shelves. What would it have lost out too? I believe it's also very popular in the US.  My reference to imperial was pointed to both NPT and BSP. 
    • No. BSP lost to the cultural/technical imperialism of living next to Trumpistan. Face it, Robertson screws were better and still pretty much lost out to the yank stuff. The Europeans hate the Brits and they don't use NPT. NPT is just as "imperial" as BSP is, being based on those useless inch thingos. Just done differently. 
    • I live in Quebec. Our license plate slogan is "Je me souviens" Translated is "We will remember" as a reminder to when England conquered us and that we must never forget what they did. Long story short, BSP is unheard of here due to being an English design. I'm surprised our nazi anti english government office the OQLF hasn't kicked in my door yet just talking about it, yet alone imperial anything.       
    • Thanks for that! I did a quick Google search looked up some of hydaulic stores and didn't see it listed on the website, I'll give them a ring. Also found out later that I can buy 2 oem bleeder bolts for 10 bux and come with the washer which I might do so I don't waste the money it costs in petrol to find 2 washers (already did that lol). The old copper washes look in good nick, I drove it after taking it off and putting it back on and didn't see any  Part number here for reference if anyone needs: 14053-42L0A  
×
×
  • Create New...