Jump to content
SAU Community

Rb 25/26/30 Engine Parts Fs

GTRgeoff
 Share

Recommended Posts

GTRgeoff Grand Master

GTRgeoff

Posted
Posted

Not needed parts due to RB26/30 race engine build for the 25t.

Large items pickup South Morang Melbourne. Postage/courier at buyers cost for smaller items. All offers considered. Pickup before 28 Feb 06 or they will be relocated to Brisbane.

RB26 parts.

R34 stock turbos, $800 as paid for when I bought them for my RB25DETT project, I drove them 3km.

Polished plenum with throttle bodies, $350

Injector rail x 2, $80 each

Injectors x 6, $300 Sold.

440cc Toyota (I suspect) injectors x 6, fit RB20, 25NEO, 26 but different plugs needed, $250

Con Rods, $300 come with ARIAS RB25det forged pistons that are scored and 1mm oversize (87mm) so may suit resize to 86.5 or 86mm with new rings.

RB25DET parts

Complete head with cam covers, no plug cover, pitting in quench zones on 1,2,3 from whatever scored the bores but nothing a surface won't eliminate $400 Sold

Injectors and rail, $150. I can have these highflowed to over 700cc for about $75 each if desired for stock look.

Intake including throttle, runners, gasket plate, $100 Sold

Stock exhaust manifold, $100

Stock rods linished and polished, $150

RB26 manifolds cut and welded to suit RB25DET head, $150Sold

Stock oil cooler/filter mount with hoses, $30

Bottom end, no pistons or rods or harmonic balancer or oil pump, includes stock sump, oil pickup, rear main housing, water pump, crank and cradle, oil squirters, cam belt drive, dipstick, O ringed, crank straightened and grub screwed and oil ports chamfered. Has been scored so will need oversize to 87.5mm $500

RB30DE parts

Rods from SII RB30DE motor with stock pistons $50

Oil Pump, $50

There may be other parts left over after the build but I need most for the new project. I'll update as I find stuff to get rid of. Don't ask for pictures, we all know what this stuff looks like. I'm prepared to do a deal for bulk lots.

Contact Geoff

email preferred to PM (in sig), or call 0408124767

>_<

post-6392-1170989402.jpgpost-6392-1170989536.jpg

Link to comment
https://www.sau.com.au/forums/topic/155266-rb-252630-engine-parts-fs/
Share on other sites
GTRgeoff Grand Master

GTRgeoff

Posted
  • Author
Posted

This is a standard side feed RB26 plenum with six throttles. It doesn't come with the section for the injectors that goes between the head and the throttles. It won't bolt up to any other RB head without an adaptor plate. One possible solution is to cut the runners and weld on a plate for the throttles to bolt up to, which is what I was going to do with it on an RB25.

GTRgeoff Grand Master

GTRgeoff

Posted
  • Author
Posted

Done.

Updated, forgot to mention the head is slightly pitted in the quench zones due to whatever went in and scored the bores. Photos attached.

Betz Rising Star

Betz

Posted
Posted

kinda interested in the turbo's Geoff, I'll do a search for specs and see what if anything is needed to fit them to my r32 (pretty sure my car has aftermarket dumps)

if you have the details I need pm me when you get a chance, in the meantime I'll try and hunt up specs myself

cheers

GTRgeoff Grand Master

GTRgeoff

Posted
  • Author
Posted

Sorry I was off for a couple of days in Brisbane. Ran 2 cars up and tried to buy a house but no joy.

Anyway the head and RB25 intake are sold.

Tristan and Simon you are welcome to the turbos if you want them separate, but not sure why as they are too small for any single application like an SR20 or CA18. First to pay takes them.

Likewise Jesse. They are a straight boltup to any RB26 manifolds and dumps but they need the bolt on lines.

Scott, I'll grab pics in a moment and check to see if RB20/26/30 plugs fit. I'll be at the meeting Tuesday and the cruise so we can catch up then if you want.

GTRgeoff Grand Master

GTRgeoff

Posted
  • Author
Posted

Pics of the injector socket with a GTR/RB30 plug and also a GTR injector. The plugs don't fit mate but I bought the RB30 plugs from Bursons so they could help with something suitable.

The injectors have the following numbers: 8E25 and 23250-42018

post-6392-1171433326.jpg post-6392-1171433470.jpg post-6392-1171433705.jpg post-6392-1171433728.jpg post-6392-1171433756.jpg post-6392-1171433965.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By GTSBoy · Posted

      I don't think the shuffle can damage the turbos. It only happens at low shaft speeds and loads. It's just annoying (to some people - others are tickled by the effect) and it quite possibly reduces spool performance a little bit.
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Oh dear. The panel beating needs to be done before the filler work. Do you have a photo of the dent before you started? Hard enough to not flex and only hit the high spots?  What do you mean it was just temporary? 
    • Manur33
      Vag Coil Diy loom wire guage selection

      By Manur33 · Posted

      Can u check this way it works for power supply?
    • Manur33
      Vag Coil Diy loom wire guage selection

      By Manur33 · Posted

      These coils draw 10amps that what i read online
    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
×
×
  • Create New...