Jump to content
SAU Community

Recommended Posts

nah of course not. how could a change in charge temperature, density and oxygen composition possibly change the vehicle emmisions? :)

The change in temperature and density will be measured by the air mass meter(s), and the ECU will use this signal to set injector pulse. If everything's working well it should not affect emissions much, if at all.

Change in oxygen composition? Do you mean change the oxygen content of air? By what process could that occur??

For the original poster - take it to a tuner and ask for an emissions legal tune ;-) You will need to do different things depending on which exhaust gases are too high, so get an emissions check from the RTA to give you a baseline starting point.

Read this thread thru to the end;

http://www.skylinesaustralia.com/forums/in...amp;hl=emission

HTH

Link to comment
https://www.sau.com.au/forums/topic/155803-emissons/#findComment-2903405
Share on other sites

indeed. change anything and you can expect the emissions to get worse - do you think nissan's engineers are idiots?

Not at all. I suspect they have built the system to be emissions legal at many different intake temps.

I made the assumption that a bigger intercooler would be analogous to a lower ambient temperature. I may well be full of crap as i have no first hand experience, but the reasoning behind "change anything and you can expect the emissions to get worse" seems pretty weak. Care to elaborate on why? Is it because the intercooler changes the oxygen composition ;-)

Link to comment
https://www.sau.com.au/forums/topic/155803-emissons/#findComment-2913117
Share on other sites

I guarantee adding an intercooler 4 or 5 times the size of the o.e.m component will change the emissions from the factory recorded specs.

Stating otherwise is just showing your ignorance of the facts :D

Cheers :happy:

if this is true how come, to get a intercooler enginered there's no need to do a emissions test?you think if it changed emissions to much engineers would have to get them passed by the rta??????

Link to comment
https://www.sau.com.au/forums/topic/155803-emissons/#findComment-2913237
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...