Jump to content
SAU Community

Recommended Posts

nah of course not. how could a change in charge temperature, density and oxygen composition possibly change the vehicle emmisions? :)

The change in temperature and density will be measured by the air mass meter(s), and the ECU will use this signal to set injector pulse. If everything's working well it should not affect emissions much, if at all.

Change in oxygen composition? Do you mean change the oxygen content of air? By what process could that occur??

For the original poster - take it to a tuner and ask for an emissions legal tune ;-) You will need to do different things depending on which exhaust gases are too high, so get an emissions check from the RTA to give you a baseline starting point.

Read this thread thru to the end;

http://www.skylinesaustralia.com/forums/in...amp;hl=emission

HTH

Link to comment
https://www.sau.com.au/forums/topic/155803-emissons/#findComment-2903405
Share on other sites

indeed. change anything and you can expect the emissions to get worse - do you think nissan's engineers are idiots?

Not at all. I suspect they have built the system to be emissions legal at many different intake temps.

I made the assumption that a bigger intercooler would be analogous to a lower ambient temperature. I may well be full of crap as i have no first hand experience, but the reasoning behind "change anything and you can expect the emissions to get worse" seems pretty weak. Care to elaborate on why? Is it because the intercooler changes the oxygen composition ;-)

Link to comment
https://www.sau.com.au/forums/topic/155803-emissons/#findComment-2913117
Share on other sites

I guarantee adding an intercooler 4 or 5 times the size of the o.e.m component will change the emissions from the factory recorded specs.

Stating otherwise is just showing your ignorance of the facts :D

Cheers :happy:

if this is true how come, to get a intercooler enginered there's no need to do a emissions test?you think if it changed emissions to much engineers would have to get them passed by the rta??????

Link to comment
https://www.sau.com.au/forums/topic/155803-emissons/#findComment-2913237
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I downloaded the apps (for windows) and Consult 1 doesn't have this function on it for the Consult 1 plug which I'm pretty sure all Skylines have. You would think someone would have a workaround after 30 years for all Skylines which have ABS.
    • Also, I don't know the actual ABS system on the skylines, but a sneaky thing could be a piece of electronic equipment that makes the ABS think you're moving, and then same piece can send a signal for a locked up tyre... Activate ABS without slamming brakes...
    • The team at OBD2 Australia are pretty good, shoot them an email and ask them. I've dealt with them before for work stuff. I'd be shocked if it didn't work, so long as Consult can activate the ABS. But you might need to use KLine for it which would be the stopper, as I don't think that piece does KLine comms.
    • Yeah and hence my ghetto way of slamming the brakes, get the ABS to cycle, rebleed seems to be a sensible workaround.
    • Hey! Happy to help. Nothing inherently wrong with the adapter, it's more so with Brett Collins himself. He gave me a lot of incorrect information when I was in contact with him and was extremely rude when I challenged him. He stated I could not use any aftermarket twin plate clutches except for his own, not to use the dush shield, bla bla bla and it was all BS.  Collins stated to cut roughly 14mm's off the housing, I took off 15mm to make room for the dust shield. I would confirm with whatever adapter manufacturer you're using. 
×
×
  • Create New...