Jump to content
SAU Community

No Compliance Plate On Car....

Antone

By Antone,
in General Automotive Discussion

 Share

Recommended Posts

Amaru Veteran

Amaru

Posted
Posted

The original Nissan build plate is blue (most cars have these on them still, some have them removed).

The green plate is the old compliancing scheme (pre 2005 I think?)

The purpley-pink sticker or plate is the new SEVS compliancing scheme.

  • 4 years later...
gdawg Enthusiast

gdawg

Posted
Posted

Recently bought a 2nd hand R32 GTR registerred in Victoria. Checked out RTA website and it all looks correct.

There is NO compliance plate.

VIN is engraved on strut tower (drivers side)

Will i have issues with the ID check? What do they expect you to do if the VIN is engraved?

Some more feedback from other peoples experiences would be good

Cheers

10 4 Veteran

10 4

Posted
Posted (edited)

Recently bought a 2nd hand R32 GTR registerred in Victoria. Checked out RTA website and it all looks correct.

There is NO compliance plate.

VIN is engraved on strut tower (drivers side)

Will i have issues with the ID check? What do they expect you to do if the VIN is engraved?

Some more feedback from other peoples experiences would be good

Cheers

1989 Model?

Mine, my old 32GTR & a mates 89 R32 GTRs have no purple / green compliance plates.

All came in under 15 year rule (loop hole closed). I passed pits no worries cause the jap vin is on the system and it had been registered before.

Just grab the Jap vin, call REVS.

Edited by 10 4
gdawg Enthusiast

gdawg

Posted
Posted

My car is listed as a 92 model (VicRoads)

I did do a little more reading of the forum last night and found a purple/pink sticker on the passenger door jam, so things are starting to look OK

Need to get the car on a hoist and assess how much aftermarket gear i will have to revert to stock. The car looks fairly stock to me, exept for exhaust, BOV (very annoying), turbo timer, etc.

Do ppl have any issues with oil catch systems?

Anyway, Back on topic. My car appears to have a Pink/Purple sticker, however..

I read somewhere ppl having issue with an engraved VIN, rather than stamped? Can anyone shed some light?

Chris Rogers Grand Master

Chris Rogers

Posted
Posted

purple sticker means its complied and ready for rego. take it to your local registrar and pay them. job done. it was the steel plated VIN tags that vicroads went nuts on. if it was stamped into the body then there usually was not a probelm.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...