Jump to content
SAU Community

Recommended Posts

sup

forgive the stupid question/noobness. but do rwc joints usually pick on such things?

i went today to about 7 places and they all gave me the same farkin answer "come by tomorrow or wednesday"

anyway, at one place the guy just took a very quick look at the car and spotted these 3 unroadworthy things.

going tomorrow to a...umm...a..."special" rwc place :P:) and get this over with but just curious...

bit tight don't you think?

dirty headlight

dscf2119tn6.jpg

don't know if you can see it but the very thin line under the p-plate. bottom left corner of the p-plate (dirt)

dscf2120zk5.jpg

dirt blinker

dscf2122uw9.jpg

Link to comment
https://www.sau.com.au/forums/topic/155989-do-these-look-un-roadworthy-to-you/
Share on other sites

as long as they work i dont see anything wrong.. If a windscreen is chipped or cracked its un roadworthy or moisture in headlights/tail lights

they all work. the line on the windscreen is just dirt that doesn't wanna come off too easily. whatever that is on the headlight, it's inside but it's just as good as the other one when light is actually turned on...

Those headlights are pretty bad and I have seen various EL Falcons, etc, fail roadworthy in similar or worse condition. As previously posted, try to use cutters and buff the headlights, but remove them off the car first and take care not to burn the plastic.

Windscreen can simply be polished off, by a professional glass polisher.

Tail light is tricky as you have a moisture issue, thus have a build up of dirt/grime inside the light assembly.

Think yourself lucky. Many years ago, to get a roadworthy, you HAD TO replace the windscreen. Without any form of measuring equipment, they always deemed that a (used) windscreen did not meet the standard for light transmission.

yeah i guess it's not all too bad but remember this was just a very quick look it wasn't an actual inspection.

i went this morning to a different place, didn't notice these little things but came up with this list:

l/h outer e/v boot split

r/h outer e/v boot split

radius arm bushes

he said it would cost $275 to replace these with new ones. does this sound right? already wasted $100 on the inspection.

still cheaper if i was to get a "special" rwc :kiss:

Edited by R-SPEC

what the hell is an EV boot.. a CV boot?

try ringing Chris @ Centreline for a 2nd quote 94692914. They're just off Mahoneys Rd and won't rip you off.

PS $100 is a ripoff.. I hope that was for 2 x $50 inspections at different places. Don't forget that if you take it back to the same place within the 30days you do not have to pay another inspection/RW fee.

how does that work? did they have to fix something or put in whiteline bushes? I think from memory their alignments are $90 for 4 wheel.

Edit: There you go, Michael said a camber kit is about $300 or thereabouts with an alignment.

Also it was probably a Whiteline kit, and Centreline usually charge less than if you buy direct from Whiteline.

You can have a look at one of Sydneykids threads to compare prices for the kits.

well being that I wasn't there and don't know the full circumstances of the problem, I can only suggest you look at the receipt and give Chris a call if you don't understand what was done to the car and what you were paying for. Chris has always justified what he has done or what needs to be done to our cars and the price/quote even without being asked and to the point of him giving me back the broken parts without asking for them.

To me it sounds like something else was obviously fixed/replaced and Justin isn't clear on what he was paying for.

hehe

nah dezz was with me at the time cause he got some work done on his car earlier that day.

aparantly... the camber on both wheels on the passenger side magicaly changed cause i had a big side on accident.. evan though theres no damage on my car... or on the wheels.. anyways

he goes "its going to take 2-3 hours to fix and cost a few $100"

and 30 minutes later the camber had the correct settings again.. and i was down $300

he evan said to dezz "your friend must of had a big accident"..

my theory is... 2 ppl installed all the suspension stuff originaly.. 1 on each side...

the guy who did it on the passenger side didnt do the camber properly or something...

what the hell is an EV boot.. a CV boot?

try ringing Chris @ Centreline for a 2nd quote 94692914. They're just off Mahoneys Rd and won't rip you off.

PS $100 is a ripoff.. I hope that was for 2 x $50 inspections at different places. Don't forget that if you take it back to the same place within the 30days you do not have to pay another inspection/RW fee.

yeah i guess it's not all too bad but remember this was just a very quick look it wasn't an actual inspection.

i went this morning to a different place, didn't notice these little things but came up with this list:

l/h outer e/v boot split

r/h outer e/v boot split

radius arm bushes

he said it would cost $275 to replace these with new ones. does this sound right? already wasted $100 on the inspection.

still cheaper if i was to get a "special" rwc :ninja:

:rofl:

well being that I wasn't there and don't know the full circumstances of the problem, I can only suggest you look at the receipt and give Chris a call if you don't understand what was done to the car and what you were paying for. Chris has always justified what he has done or what needs to be done to our cars and the price/quote even without being asked and to the point of him giving me back the broken parts without asking for them.

To me it sounds like something else was obviously fixed/replaced and Justin isn't clear on what he was paying for.

Agreed.......

Sorry Justin, i still find your story hard to beleive. I've been to Centreline, many times for different things, Chris is currently sorting out a set of coil-overs for my car, and i have had nothing but top class work at good prices.

It's strange how almost every person that works on your car f**ks it up or rips you off :) ; even though many others have never had issues using the same business.

If you still have concerns/issues, (and you obiously do) why not approach Chris and ask for clarification on what was done in those 30mins :huh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...