Jump to content
SAU Community

Recommended Posts

Used my G4 brake kit with a full set of slicks last night and they worked great! No brake fade, no cracked rotors and no burnt brake pads nice and constant the entire night ( 3 x 20 minute sessions ).

Two very big stops on the circuit from around 230kms each, by far a stronger package than standard brakes.

Link to comment
https://www.sau.com.au/forums/topic/156792-g4-brakes/
Share on other sites

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I currently got the 356mm fronts only with the performance pads. The kit itself was very easy to install went straight on with no issues. The lines seem a little long to be truthful but was not hard to run them out of the way. Better than being short i guess.

Link to comment
https://www.sau.com.au/forums/topic/156792-g4-brakes/#findComment-2913825
Share on other sites

really couldnt fault them in my car which is stripped out so weight is down a little on a road legal car. With some cooling ducts and 1 hour between our 20 minute sessions.

Also have porsche cup slicks on too which makes for a whole heap of stopping going on when you get on the pedal

Link to comment
https://www.sau.com.au/forums/topic/156792-g4-brakes/#findComment-2915192
Share on other sites

Tacker,

Can I ask what you paid for the 356mm G4 kit?

Andrew

I currently got the 356mm fronts only with the performance pads. The kit itself was very easy to install went straight on with no issues. The lines seem a little long to be truthful but was not hard to run them out of the way. Better than being short i guess.
Link to comment
https://www.sau.com.au/forums/topic/156792-g4-brakes/#findComment-2920060
Share on other sites

Sorry i cant tell you excatly as i had to have them freighted to Dubai and it was just the one price, but the figure above would be close without the freight.

Speak to just jap they supplied them, and it was 5 months ago so not sure of current price.

Link to comment
https://www.sau.com.au/forums/topic/156792-g4-brakes/#findComment-2920541
Share on other sites

Yes they are full slicks i managed to find about 15 sets of part worns.

I did mention that in the posts above as i said there is a whole lot of stopping going on when you get on the pedal. Well thats not quite right you do hit a higher top speed as your corner speed is improved. And you are on the brakes harder but for a shorter time frame as they just hang on sooo much better than the semi slicks through corners which allows you to carry more speed. But all in all i would think that full slicks are harder on the brakes not by much but a little.

I am sure that other will have something to say about it as well, but i am happy with the performance of these brakes. I have them and i have used them a few times now and i have had no problem.

Edited by tacker
Link to comment
https://www.sau.com.au/forums/topic/156792-g4-brakes/#findComment-2922592
Share on other sites

I also ran my G4s at Eastern Creek on the weekend and they were excellent. This is an overwieght GTR (1500kg+) on semi slicks. And a pretty hot day.

I have the 324mm ones under 17" rims - they bolted straight on from what was in the kit.

I thrashed them all day and never had a bit of fade - they also gave excellent feel through the pedal. No cracks on the rotors. And the pads that came with the kit (whatever they are) were perfect as well.

You would be mad to buy any other brakes for a GTR.

Link to comment
https://www.sau.com.au/forums/topic/156792-g4-brakes/#findComment-2932426
Share on other sites

How are the brakes just for everyday driving?

fine - I don't know what the pads are or what they are rated too which worried me before I tried them. But they work fine from 0, they don't need heat in the first (which is exactly what we need in Targa brakes since the first stops are always from dead cold as well).

I will put some different pads in when I get back to the circuit racing later in the year so I know what their temp range is.

Also no squealing or anything.

Didnt you guys have to bed in the brakes at all??

I did, as usual I did 4-5 stops from 120-60 until I could smell the resin cooking off, then let it cool for a lap (2min). From there I just gave them hell with no problems.

My only remaining question about them is how well they last over time, eg the porsche aluminium monoblock brakes (gt3 style) get thrown away after each race meet. Will be interesting to see - but even if worse case the gave trouble after a couple of years it is still much cheaper to buy these twice than to buy the brembo or ap stuff once :wave:

Link to comment
https://www.sau.com.au/forums/topic/156792-g4-brakes/#findComment-2935910
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...