Jump to content
SAU Community

Recommended Posts

Used my G4 brake kit with a full set of slicks last night and they worked great! No brake fade, no cracked rotors and no burnt brake pads nice and constant the entire night ( 3 x 20 minute sessions ).

Two very big stops on the circuit from around 230kms each, by far a stronger package than standard brakes.

Link to comment
https://www.sau.com.au/forums/topic/156792-g4-brakes/
Share on other sites

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I currently got the 356mm fronts only with the performance pads. The kit itself was very easy to install went straight on with no issues. The lines seem a little long to be truthful but was not hard to run them out of the way. Better than being short i guess.

Link to comment
https://www.sau.com.au/forums/topic/156792-g4-brakes/#findComment-2913825
Share on other sites

really couldnt fault them in my car which is stripped out so weight is down a little on a road legal car. With some cooling ducts and 1 hour between our 20 minute sessions.

Also have porsche cup slicks on too which makes for a whole heap of stopping going on when you get on the pedal

Link to comment
https://www.sau.com.au/forums/topic/156792-g4-brakes/#findComment-2915192
Share on other sites

Tacker,

Can I ask what you paid for the 356mm G4 kit?

Andrew

I currently got the 356mm fronts only with the performance pads. The kit itself was very easy to install went straight on with no issues. The lines seem a little long to be truthful but was not hard to run them out of the way. Better than being short i guess.
Link to comment
https://www.sau.com.au/forums/topic/156792-g4-brakes/#findComment-2920060
Share on other sites

Sorry i cant tell you excatly as i had to have them freighted to Dubai and it was just the one price, but the figure above would be close without the freight.

Speak to just jap they supplied them, and it was 5 months ago so not sure of current price.

Link to comment
https://www.sau.com.au/forums/topic/156792-g4-brakes/#findComment-2920541
Share on other sites

Yes they are full slicks i managed to find about 15 sets of part worns.

I did mention that in the posts above as i said there is a whole lot of stopping going on when you get on the pedal. Well thats not quite right you do hit a higher top speed as your corner speed is improved. And you are on the brakes harder but for a shorter time frame as they just hang on sooo much better than the semi slicks through corners which allows you to carry more speed. But all in all i would think that full slicks are harder on the brakes not by much but a little.

I am sure that other will have something to say about it as well, but i am happy with the performance of these brakes. I have them and i have used them a few times now and i have had no problem.

Edited by tacker
Link to comment
https://www.sau.com.au/forums/topic/156792-g4-brakes/#findComment-2922592
Share on other sites

I also ran my G4s at Eastern Creek on the weekend and they were excellent. This is an overwieght GTR (1500kg+) on semi slicks. And a pretty hot day.

I have the 324mm ones under 17" rims - they bolted straight on from what was in the kit.

I thrashed them all day and never had a bit of fade - they also gave excellent feel through the pedal. No cracks on the rotors. And the pads that came with the kit (whatever they are) were perfect as well.

You would be mad to buy any other brakes for a GTR.

Link to comment
https://www.sau.com.au/forums/topic/156792-g4-brakes/#findComment-2932426
Share on other sites

How are the brakes just for everyday driving?

fine - I don't know what the pads are or what they are rated too which worried me before I tried them. But they work fine from 0, they don't need heat in the first (which is exactly what we need in Targa brakes since the first stops are always from dead cold as well).

I will put some different pads in when I get back to the circuit racing later in the year so I know what their temp range is.

Also no squealing or anything.

Didnt you guys have to bed in the brakes at all??

I did, as usual I did 4-5 stops from 120-60 until I could smell the resin cooking off, then let it cool for a lap (2min). From there I just gave them hell with no problems.

My only remaining question about them is how well they last over time, eg the porsche aluminium monoblock brakes (gt3 style) get thrown away after each race meet. Will be interesting to see - but even if worse case the gave trouble after a couple of years it is still much cheaper to buy these twice than to buy the brembo or ap stuff once :wave:

Link to comment
https://www.sau.com.au/forums/topic/156792-g4-brakes/#findComment-2935910
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...