Jump to content
SAU Community

Rd28 Diesel Block?

R_B_Boy

By R_B_Boy,
in Engines & Forced Induction

 Share

Recommended Posts

R_B_Boy Apprentice

R_B_Boy

Posted
Posted (edited)

Hi,

It stated on wikipedia that the Nissan RD28 Diesel engine is very similar to an rb block, but obviously diesel and single-cam. And that some ppl have used a custom head to convert to standard petrol.

Does anyone know if a RB Head will bolt on to a RD28 block?

If it does, then wouldn't it be a good option? aren't diesel blocks usually stronger?

Nissan RD28 Diesel

Bore: 85mm (guessing you would bore it out to 86mm if you have to)

Stroke: 83mm

l_img_null24290.jpg

Edited by R_B_Boy
Link to comment
https://www.sau.com.au/forums/topic/156988-rd28-diesel-block/
Share on other sites
Beer Baron Grand Master

Beer Baron

Posted
Posted
Isn't it better that a rb30?

RD28 - Stroke: 83.0 mm

RB26 - Stroke: 73.7 mm

RB30 - Stroke: 85.0 mm

lol, personally I wouldn't want an 85mm stroke either. but you do have a point about it comparing favourably to a 30 crank and rods in that respect.

I have no idea if this thing is feasible for a performance application though, and also not sure how comon they are?

Sydneykid Grand Master

Sydneykid

Posted
Posted

Old news, very old news. Simply put there is ZERO advantage over an RB30 bottom end. No stronger, DET cylinder head doesn't bolt straight on, water and oil galleries are different, as is water pump and oil pump etc etc.

I see nothing wrong with an 85 mm stroke and 86 mm bore (as in RB30), that's a pretty "square" engine (bore = stroke). Same as a BMW 3 litre 6 (as in M3) or a Toyota 2JZ. Neither of which are exactly bad engines. And of course an SR20 is 86 x 86 as well.

:P cheers ;)

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      And if you have to drill the oil block, then just drill it for 1/4" and tap it BSP and get a 1/8 to 1/4 BSP bush. The Nissan sender will go straight in and the bush will suit the newly tapped hole. And it will be real strong, to boot.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      No it doesn't. It just needs an ezy-out to pull that broken bit of alloy out of the hole and presto chango - it will be back to being a 1/8" hole tapped NPT. as per @MBS206 recco. That would be for making what you had in alloy, in steel. If you wanted to do just that instead of remote mounting like @Duncan and I have been pushing. A steel fitting would be unbreakable (compared to that tragically skinny little alloy adapter). But remote mounting would almost certainly be 10x better. Small engineering shops abound all over the place. A lathe and 10 minutes of time = 2x six packs.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Ahh. Well the block damage is a problem, you really need to run a tap or thread chaser through it to see if the threads can be saved, but any chips are likely to be bottom end bound which is bad. Earls seem to have what you need if you want to stick with mounting direct on the block: https://rceperformance.com.au/parts/earls-straight-adapter-1-8-npt-male-to-1-8-bspt-female.html, but as I said above I'd recommend remote mounting the sender
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm not quite understanding or I'm missing steps here, (I appreciate people are trying to inform my brain but I am of the dumb, especially today) - All I want to do is mount the male BSPT of the OEM sender into the system somewhere without it snapping the adapter via vibration. The Nissan sender has a male 1/8 BSPT output. The block has a (very destroyed) 1/8 NPT input. I'm not really sure how a lathe assists with that, and also don't know anybody with a lathe, nor specifically what I would want to buy. I'm not really sure how adding additional adapters creates a better, more leak proof resilient seal here.
×
×
  • Create New...