Jump to content
SAU Community

Fs R32 Gtst

GTS900

By GTS900,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

GTS900 Contributor

GTS900

Posted
Posted (edited)

Hey peeps, looking at selling my R32 GTS details as follows:

90 Model Import

Delivered Sept 2005

RB20

Manual

Sedan

Metallic Silver

Rego till Oct 2007

GTS-900 plates

80XXX Kms

Std MSpec version

Sunroof

Remote Alarm

Xforce exhaust

Pod filter

Profesionally lowered

Momo Gearnob

Above are the only modifications, and i have all equipment to take the car back to standard.

Body is 100% perfect, not a dent or scratch.

Driveline is great.

Tyres are 95% new.

Interior is 98% perfect, 2 little burn marks.

Link to carsales add http://www.carsales.com.au/used-cars/priva...20South%20Wales

Not a cent to spend.

Now $12500

One of the better GTSTs going around.

Can email pics as i do not know how to put them up (sorry)

Located near Chatswood (Sydney)

Regards

Ari

Edited by GTS900
Link to comment
https://www.sau.com.au/forums/topic/157715-fs-r32-gtst/
Share on other sites
  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • BASHERnissan
      TPS voltage RB25DET

      By BASHERnissan · Posted

      Hi guys my TPS voltage is reading over 2v at idle.  My Haltech ECU is reading around 40% throttle position at idle also which is really strange. Note the actual throttle position sensor is brand new…    anyone have any experience with this or know how to calibrate it on Haltech ? 
    • joshuaho96
      Cas issue

      By joshuaho96 · Posted

      The OEM disk will not work on any AEM ECU, you need to use the one they made. You shouldn't have to flip the CAS or whatever you were describing, if you set the ignition sync offset correctly it can't backfire. Make sure you're using a spark plug lead on coil 1 instead of the timing loop to avoid weird issues with the timing light. Double check that your timing settings are actually correct, like is the 24 tooth configured correct or should it actually be 12 teeth for 1 crank revolution? I also found this: 305817248-AEM-Undocumented-Settings-v1-2.pdf    
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Yeah, I don't believe the M35 uses a deadhead system.
    • GTSBoy
      M35 Aftermarket Fuel Pump

      By GTSBoy · Posted

      Have you done your thinking backwards? 3 bar, 43.5 psi pressure drop being the presumed specification for an injector, means you need 3 bar upstream when they are firing into atmospheric pressure, and more upstream pressure than that when on boost (you add your boost to your rail pressure to maintain 3 bar across the injector) and you need..... less pressure upstream when you have vacuum in the manifold. So, presuming that you're idling at -10 psi, then you only need ~23 psi in the rail. I realise that I did not need to say all of that to you specifically Matt, once you'd realised your mistake. It's mostly there for complete clarity for others.
    • Dose Pipe Sutututu
      RB25 Drama's

      By Dose Pipe Sutututu · Posted

      Have you reached out to the guys at Spool Imports? They are a Ross dealer, I can imagine they would have the rings just sitting on the shelf (I could be wrong).  
×
×
  • Create New...