Jump to content
SAU Community

Recommended Posts

hi guys

had this rattle for a while now but now its really getting on my nerves

when in low revs and in any gear, there is a real "fuzzy/buzzy" type of rattle on the passanger front seat side, sounds like its coming from infront of the glove box. At first i thought it was the pod rattleing against the guard but then i padded the pod up and it still happened so i eliminated that out of the factor.

the sound only happens when driving in low revs in any gear and once u pick up some revs, the sound dissapears.

i thought maybe a gasket? sounds like its coming from somewhere around the turbo

has anyone heard of this as a common problem or have any suggestions on what it could be

cheers

Link to comment
https://www.sau.com.au/forums/topic/158082-r33-series-1-engine-rattlesound/
Share on other sites

do u feel it through your pedal? mine vibrates/makes an aweful sound from 2000 to 2500 rpm in 2nd, 3rd and 4th

ive been told its just the clutch out of balance at that sort of rpms so not to worry about it

My car has that same rattle or whatever it is. When it first reared its ugly head i got nervous, but it still does it 3 months on and has been on the dyno for a few hours where it made good power and the tuner didnt comment on it at all....So it cant be that bad i reckon, if it gets annoying just turn the stereo up lol....

maybe its the head shield around the turbo. might have a screw loose and be tapping metal on metal (sorta vibrates on it at low rev). just a thought.. make sure all screws and clamps n stuff are all tightned around that area. if they are, then it probably an iternal thing

was just concerned cause it comes from the same area as where the turbo is located. It sounds like a vibration like something is vibrating against something else.

it wierd cause it goes away after about 1.5-2k revs.

Strange

Yeah I have exactly the same thing, But I'm sure my comes from the gearbox. As I removed the rubber surrounding from the gear stick and it was crystal clear it came from the gearbox. I notice the sound only happens if my motor is laboring or just off it.

mine does the exact same thing. at low revs. i have a twin plate clutch though. theyre tradtionally very noisy things. and its the plates and the disc that sits in the middle thats moving and virbating and making the noise. nothing to be worried about IMO

Make sure the noise isn't coming from the front of your engine....

How many K's has your car done....

Sounds like you may need to replace your cam belt, cam bearings, and seals.....

But yeah, check the black case on front of engine at dizzy

I have the same problem... only loud when engine is cold and sounds like its coming from front of engine (not in the engine) near belt... at low revs aswell.

Sounds like you may need to replace your cam belt, cam bearings, and seals.....

But yeah, check the black case on front of engine at dizzy

sounds like my problem though i wouldnt have a clue...

check the black case on front of engine?

Could you please elaborate? what to look for when im checkin the black case?

Edited by bluey33

done like 110k

its not coming from the front of the engine. it sounds like the sound is coming from infront of the glove box ,engine pay side (not inside the car :happy:) thats why i suspected my POD was rattling against my guard...but it wasnt that

the sound comes and goes fairly quick its only when the car struggles on low revs

dunno what the hell it is, and its not like i can pop the hood and look in when it makes the noise cause it only happens when moving, does happen on idle or when reving the car in N.

  • 1 month later...

Hey Peeps,

I got a rattle coming from the cam belt cover, a new belt was fitted 2 months ago, is only there when the engine is cold, once she has warmed up it goes,

any ideas what this could be??

(its a 1996 R33 S2 GTS-T)

it is booked in for a service in 2 weeks, (car is under complete warrenty untill september for all parts)

Cheers

Dazzler

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...