Jump to content
SAU Community

Recommended Posts

This Sunday, 11/03/07, Northern Street Cruizers (NSC) are having an Automotive fun day at Calder Park Rwy. The day allows entrants to participate in various forms of motorsport, in a fun and safe atmosphere.

Details:

- Lacation: Calder Park Rwy

- Cost: $40 per entrant (includes one buddy pass) ... /... Spectators: $5

- Gates Open: 8:30am

- Events start: 9am

- Events finish: 4pm

Events: Each event is scheduled to run for approx. 2hrs, but this may vary due to popularity of certain events.

Drags: Old school style

- Heads up (not timed),

- Flag start (No Christmas Tree)

Hot Laps: Fun Laps

- Full Circuit (Long track)

- Not Timed

Burnouts:

Slalom:

- Held at the back of the track

- Timed

Drift:

- Held through flip-flops and long final corner.

Conditions of Entry:

- NO CAMS or AASA lic. required

- Drivers MUST wear Helmets, long sleeve shirt, full length paints (eg:jeans), socks, closed footwear (no thongs, sandals, etc). NO nylon or any other easily flamable clothing will be permitted. Basically just the usual Friday Night Drag attire.

- Any form of motorsport is dangerous, participate at your own risk.

- Cars will be scrutineered for safety.

Additional Notes:

- Helmets will be available for HIRE: $20

- BBQ food will be sold for Lunch.

Hope to see ya there!!!

Damn im busy on sundays

im in this is what ive beig hanging out for something that cheap doesn't require cams and a many event.

i wont do the burnouts or the drags tho due to the gear box which im saving $1600 to get fixed.

hey for sau guys that are going u wona meet upand cruiz in to calder park.

if so were would be a good place to meet up.

i was thinking the start of the western ring road in grensbrough shopping center would this be allright

Chris: I am planning on going but am not sure what time i'll get there as I have a Bucks Nite on Saturday :) .

Ziad: You pay at the gates, on the day. Not too sure how many people will enter, as this is the first event of this type they are holding, and they left it to the last minute to confirm event and advertise. This event is also advertised in alot of other forums, so hopefully they get a good turn-out.

Dave: Our events schedual seems to clash too often :) .

Well congratulations to Anna for putting up with you for a whole year as a married couple. Lets hope the many more years of marrage doesn't send her insane :P .

Hahaha: All the best buddy, we need to catch up soon!!

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...