Jump to content
SAU Community

Recommended Posts

As the topic states I have had a bit of a paintswap with a cabbie.

Front left headlight is damaged and will need replacing.

Front left indicator is damaged and will need replacing.

Bumper will need to be replaced as well.

Anybody know of some decent repairers on the Gold Coast?

And whats the likely hood of getting my hands on a S1 M Spec original front bar through a repair shop?

I was looking at aftermarket so this might be a good excuse to get one.

Does anyone know where I can get a Top Secret front bar thats made out of flexible fibreglass/mflex type material? :sorcerer:

Link to comment
https://www.sau.com.au/forums/topic/161024-r33-panel-beaters-se-qld/
Share on other sites

You would be better off finding the front bar yourself, Wreckers or Body shops parts, The Panel house is a good example, otherwise you pay for them to find it dodgey or not, the headlight/blinker are one unit, be prepared for around 700 or new from nissan.

:laugh:

Yeah he only has less than 100 posts under his belt so it might help to point him towards how to do a search.

What I mean to say, go easy on people. Its his first post for help in the qld section lets not jump the gun.

Better yet, thanks Chris for the effort taken...

This should help him out... :mellow:

Yeah he only has less than 100 posts under his belt so it might help to point him towards how to do a search.

What I mean to say, go easy on people. Its his first post for help in the qld section lets not jump the gun.

Better yet, thanks Chris for the effort taken...

This should help him out... :)

Just whack a "drift accident" sticker on the bad boy..

good as gold

Thank you "pear" for the constructive post.

And to clarify things - the Taxi pulled out on to the main road whilst not looking to the right (which is the direction I was comming from), and as a result the accident occured. I could not move into the right hand lane as a car was present at the time.

I have previously used the "SEARCH" tool only to find workshops in brisbane. Maybe I should try defining my search terms more clearly.

But once again, thank you to the person/people who contributed to my topic constructively.

Cheers,

Tyrone.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...