Just Got Back From In Tune Performance

[Pal]

just letting you guys know about In Tune Performance. just had the timing belt done (fitted gates performance belt), walbro 550hp fuel pump fitted, all front belts , coolant and fuel filter replaced and safc2 dyno tuned. cost 350 to fit everything (had all the parts) and 160 to dyno the safc. went in with 256rwhp and come out with 271rwhp (could be cause of different dynos). car definately sounds happier(exept for a bit of noise from the new timing belt (was expected)). recommend him for work south of river. located at unit 3/28 salpietro st, bibra lake. ph 94346608,Aaron Gregory. p.s. he has no eftpos so cash only

[jazza08]

$350 to fit a timing belt, fuel pump, change oil/filter and coolant...

Thats a pretty good price. And only $160 to fit and dyno tune an SAFC2, thats pretty damn cheap!

[mitchy_]

does he do pfc's? mine will need to be done shortly...

[phenline]

just letting you guys know about In Tune Performance. just had the timing belt done (fitted gates performance belt), walbro 550hp fuel pump fitted, all front belts , coolant, oil and fuel filter replace and safc2 dyno tuned. cost 350 to fit everything (had all the parts) and 160 to dyno the safc. went in with 256rwhp and come out with 271rwhp (could be cause of different dynos). car definately sounds happier(exept for a bit of noise from the new timing belt (was expected)). recommend him for work south of river. located at unit 3/28 salpietro st, bibra lake. ph 94346608,Aaron Gregory. p.s. he has no eftpos so cash only

hey pal, so what parts did you take yourself exactly ? i want to do the same thing.

[Pal]

he did not fit the safc , only tune .did not change oil. only coolant and fuel filter. i took in a new gates timing belt, fuel pump, alt belt, power steering belt and aircon belt, all from repco, cost about 170 bux for all the belts and ebay fuel pump. hes not keen on pfc's (haltec man) but give him a ring.

[Steve]

Noise from the new timing belt? I have changed a few, and they never made noise...

[Pal]

i have read on these forums that the gates timing belt is a little bit whiney (not very loud) until in beds in. where the ones u put in the standard belts or performance belts steve?

[Steve]

both

[Dsturbd]

Gav jones had his s13 tuned there with PFC ... in his perth street car add it mentions pfc tuning along with haltech n many other ecus

[xxx_r33]

just got back today and was happy aswell

[WhiteHot_R33]

just got back today and was happy aswell

Hey just wondering what you had done?

I am looking to get an ECU fitted/tuned and am considering In Tune amongst others for the job. . .

Cheers

[Daniel R32]

ive just had my 32 come back from intune and very happy. aaron looked after me with any problems i had. i got a haltech e-11 installed and tuned x force exhaust, 550 walbro pump, plugs, fuel filter and the map sensors for the ecu done too. i need injectors too but ran out of time with them as i am moving to karratha, so to stop it leaning out the rev limiter has now been set to 5800 rpm untill im back in perth or have the car sent down. but yeah give him a call he is very good

[N I B]

Ive only heard good things about them inc some extreme Race cars and i think they were one of the Shops that did the Training with Wolf over the last 2 weeks.Must be good with Microtech

As their tuning an S6 RX7 Drag car with 20B Quad rotor PP with 3 GT40 ITS Turbos and lots of NOS,Very tough car to tune.

[Pal]

ive just had my 32 come back from intune and very happy. aaron looked after me with any problems i had. i got a haltech e-11 installed and tuned x force exhaust, 550 walbro pump, plugs, fuel filter and the map sensors for the ecu done too. i need injectors too but ran out of time with them as i am moving to karratha, so to stop it leaning out the rev limiter has now been set to 5800 rpm untill im back in perth or have the car sent down. but yeah give him a call he is very good

hey Daniel, wot sort of power did u get out of that setup. looking at the same setup for my 33

[Daniel R32]

At the moment the car is only making 225 rwhp because the injectors are maxed out and i had run out of time to get bigger ones (i moved to karratha)

also because the injectors are maxed out the rev limiter is now set at 5800rpm instead of 8000rpm to stop me blowing up the motor.

And the car is actually n N/A and aaron reckons it should be making around 270 to 280 rwhp with bigger injectors

[wado33]

Gday there Pal, im new to tha whole forum thing but love my skylines. Ive been looking for ecu upgrade from the stock unit (ive 96 r33gtst) safc2 that u mention in ur post is that the option?

[Pal]

the safc2 is only a piggy back to the ECU. to replace the stock ECU you will need to go to a power fc, haltec, e-manage, EMS. these will cost from 1500 up to buy, and 500 up to fit and tune.

[Steve]

E manage is well under $1000 - and probably your cheapest option. I gives full ecu functionality with alot of extra features, but still utilises factory coldstart, accel enrichement, idle control etc - emanage ultimate comes with laptop software for tuning too.

They are an interceptor type ecu, so nothing too major to wire up.

Considering power fc is getting a bit scarce (new, around 1K - but they stopped manufacturing), emanage would probably be one of the cheapest, best options.

your best bet would be to do a search in the performance section, or post up there if you cant find what you are looking for - at least that way you wont be accused of whoring other peoples threads

[wado33]

E manage is well under $1000 - and probably your cheapest option. I gives full ecu functionality with alot of extra features, but still utilises factory coldstart, accel enrichement, idle control etc - emanage ultimate comes with laptop software for tuning too.

They are an interceptor type ecu, so nothing too major to wire up.

Considering power fc is getting a bit scarce (new, around 1K - but they stopped manufacturing), emanage would probably be one of the cheapest, best options.

your best bet would be to do a search in the performance section, or post up there if you cant find what you are looking for - at least that way you wont be accused of whoring other peoples threads

[Pal]

the safc2 is only a piggy back to the ECU. to replace the stock ECU you will need to go to a power fc, haltec, e-manage, EMS. these will cost from 1500 up to buy, and 500 up to fit and tune.

yeh, what steve said