Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

  • 4 weeks later...

hey guys was browsing forum found this thread, i recently took my car to aaron as a stocker only had pod filter and 3inch stainless turbo back zorst that i did myself already, for me he fitted apexi turbo timer, safc, fuel pump, piller mount and greddy boost gauge, GFB mach boost controller, FMIC, fuel filter, and dyno tuned my car run a tune into safc, done all this for $939 car come out at 286.9 rwhp at 12psi with faulty coilpacks, was very surprised at his knowldge recommend Aaron as he did a great job on my car and he is very straight foward :).

hope this helps guys,

Adam

Hmm, I thought I would give them a go, cos Lumpy isnt tuning any more, and so many people on here have had such great results

I paid nearly $1000 for intune to fit cams (that I provided) in an SR and give me a tune (power fc),

end result:

lacked power (less power after fitting cams than with stockys), rich as hell, hunted like a pig and stalled alot cold, flat spots (and not to mention he fried my battery isolation switch)

I was very sad.

took car to another dyno, figures were over 20hp down from what in tune's dyno showed, got it retuned (not at intune) I got more power, no flat spots, no hunting and stalling, no pumping soot all over my garage in the morning - and it cost me ALOT less than what I paid at intune initially

Personally I dont want to see they guy again, hear or speak to him. I feel a bit screwed after my experience there - if you know what I mean.

Just chalking it up to a very expensive lesson learnt.

who did the fix it up for you steve?

i had issue with my 1st tune, and have since took the car to all-star and been very happy with the results :huh: maybe give them a go. if ur interested i can shot u a pm

  • 1 month later...
I paid nearly $1000 for intune to fit cams (that I provided) in an SR and give me a tune (power fc),

end result:

lacked power (less power after fitting cams than with stockys), rich as hell, hunted like a pig and stalled alot cold, flat spots (and not to mention he fried my battery isolation switch)

I was very sad.

took car to another dyno, figures were over 20hp down from what in tune's dyno showed, got it retuned (not at intune) I got more power, no flat spots, no hunting and stalling, no pumping soot all over my garage in the morning - and it cost me ALOT less than what I paid at intune initially

If you have an issue with any tune/work done you should go back to the guy first. I understand why your pissed but at least talk to the shop and see if they will fix it for you ($0). If that doesnt work go somewhere else THEN bag the shop.

You really should ask first

I discussed the state of the tune, I paid extra for him to try and sort it (Yes, I f**kING PAID)

But thank you for your wonderful advice

I posted up here so that others reading this thread would realise that not all things are roses and goodness - and wont end up wasting big $$$ for f**k all

But you please feel free to use them.

  • 4 weeks later...
You really should ask first

I discussed the state of the tune, I paid extra for him to try and sort it (Yes, I f**kING PAID)

But thank you for your wonderful advice

I posted up here so that others reading this thread would realise that not all things are roses and goodness - and wont end up wasting big $$$ for f**k all

But you please feel free to use them.

No worries buddy the advise is free. Ive heard some mixed result from Aaron some love him others dont. I wont be using his services any time soon.

Edited by SSidewayz

it's always the way... you'll likely hear good and bad of everyone.

there is one particular workshop i will NEVER touch again, but then others rave about it.

i do all my own mechanical work, but as yet, dont know who id get my car tuned by...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...