Jump to content
SAU Community

Recommended Posts

Hi Guys,

Just wondering, it seems that when my car is idling it has a really faint miss every couple of seconds or so, nothing major and it drives fine under load and makes good power, just wondering if this is normal? It's hard to describe but its kind of like instead of having a constant purrr for the idle every 2-3 secs theres a slight quiet and then it starts purring again.

anythign to be worried about? Car is an R32 GTR.

Link to comment
https://www.sau.com.au/forums/topic/161260-slight-miss-on-idle/
Share on other sites

I guess its fairly normal. Try new plugs first see if it helps. If not then get your injectors cleaned see if that works. I've just got my injectors done and its a fair bit better. Yet to see if there are any improvements in fuel economy yet tho.

Mine has done it ever since moving away from the heat range 5 1.1mm gapped plugs.

If I open the gap up the idle smooths out.

The miss is stuff all but I guess it can be an annoyance if you expect it to be baby smooth. No such thing with a modified car. :)

Mine has done it ever since moving away from the heat range 5 1.1mm gapped plugs.

If I open the gap up the idle smooths out.

The miss is stuff all but I guess it can be an annoyance if you expect it to be baby smooth. No such thing with a modified car. >_<

I found the exact same thing going from 1.1 to .8 gapped plugs.

iv got his problem aswell and iv changed my plugs and put new spitfire ones on and no change

This can also be caused by resistor pack and wiring to the resistor pack.

Or even earthing of the resistor pack.

Most get a lot of heat over the years and need some attention.

You will know there is a problem when you operate the air-con.(at idle) and it misses regularly.

  • 1 year later...

Have we figured this out? I just changed from 5 plugs gapped to 1.0mm to 6 plugs gapped at 0.8mm and now I have this half miss stumbling sound coming from the exhaust every few seconds. Any updates?

Edited by cpt_impossible

Maybe get new coilpacks and clean the injectors like what others have said above?

I've noticed that this has started happening to my car as well. It's got splitfire coils and a change of the plugs about 3 weeks back and no change. A clean of the injectors might help, but too much a hassle. Everything is running good except for the idle so it doesn't bother me.

Yeah it happens when your spark plugs are gapped too close: from wiki

The gap adjustment can be fairly critical, and if it is maladjusted the engine may run badly, or not at all. A narrow gap may give too small and weak a spark to effectively ignite the fuel-air mixture, while a gap that is too wide might prevent a spark from firing at all. Either way, a spark which only intermittently fails to ignite the fuel-air mixture may not be noticeable directly, but will show up as a reduction in the engine's power and fuel efficiency. The main issues with spark plug gaps are:

· narrow-gap risk: spark might be too weak/small to ignite fuel;

· narrow-gap benefit: plug always fires on each cycle;

· wide-gap risk: plug might not fire, or miss at high speeds;

· wide-gap benefit: spark is strong for a clean burn.

A properly gapped plug will be wide enough to burn hot, but not so wide that it skips or misses at high speeds, causing that cylinder to drag, or the engine to begin to rattle.

I have mine gapped at 0.6 because my coilpacks are shit and i need new ones, but it fixes my hi-rpm misses, so until i save up for some splitfires i hav to put up with the missing at idle,

So yeah check the gap on your spark plugs, ideally should be 0.8

I have the same idle-popping issue.

Regarding plugs, I've read that the amount of resistance with power getting to the plug can change the ideal gap for your engine. So I guess a lengthy trial-and-error testing period is going to be the best way to get things the way you like them.

Edited by Legumis

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...