Jump to content
SAU Community

Recommended Posts

Hi Guys,

Just wondering, it seems that when my car is idling it has a really faint miss every couple of seconds or so, nothing major and it drives fine under load and makes good power, just wondering if this is normal? It's hard to describe but its kind of like instead of having a constant purrr for the idle every 2-3 secs theres a slight quiet and then it starts purring again.

anythign to be worried about? Car is an R32 GTR.

Link to comment
https://www.sau.com.au/forums/topic/161260-slight-miss-on-idle/
Share on other sites

I guess its fairly normal. Try new plugs first see if it helps. If not then get your injectors cleaned see if that works. I've just got my injectors done and its a fair bit better. Yet to see if there are any improvements in fuel economy yet tho.

Mine has done it ever since moving away from the heat range 5 1.1mm gapped plugs.

If I open the gap up the idle smooths out.

The miss is stuff all but I guess it can be an annoyance if you expect it to be baby smooth. No such thing with a modified car. :)

Mine has done it ever since moving away from the heat range 5 1.1mm gapped plugs.

If I open the gap up the idle smooths out.

The miss is stuff all but I guess it can be an annoyance if you expect it to be baby smooth. No such thing with a modified car. >_<

I found the exact same thing going from 1.1 to .8 gapped plugs.

iv got his problem aswell and iv changed my plugs and put new spitfire ones on and no change

This can also be caused by resistor pack and wiring to the resistor pack.

Or even earthing of the resistor pack.

Most get a lot of heat over the years and need some attention.

You will know there is a problem when you operate the air-con.(at idle) and it misses regularly.

  • 1 year later...

Have we figured this out? I just changed from 5 plugs gapped to 1.0mm to 6 plugs gapped at 0.8mm and now I have this half miss stumbling sound coming from the exhaust every few seconds. Any updates?

Edited by cpt_impossible

Maybe get new coilpacks and clean the injectors like what others have said above?

I've noticed that this has started happening to my car as well. It's got splitfire coils and a change of the plugs about 3 weeks back and no change. A clean of the injectors might help, but too much a hassle. Everything is running good except for the idle so it doesn't bother me.

Yeah it happens when your spark plugs are gapped too close: from wiki

The gap adjustment can be fairly critical, and if it is maladjusted the engine may run badly, or not at all. A narrow gap may give too small and weak a spark to effectively ignite the fuel-air mixture, while a gap that is too wide might prevent a spark from firing at all. Either way, a spark which only intermittently fails to ignite the fuel-air mixture may not be noticeable directly, but will show up as a reduction in the engine's power and fuel efficiency. The main issues with spark plug gaps are:

· narrow-gap risk: spark might be too weak/small to ignite fuel;

· narrow-gap benefit: plug always fires on each cycle;

· wide-gap risk: plug might not fire, or miss at high speeds;

· wide-gap benefit: spark is strong for a clean burn.

A properly gapped plug will be wide enough to burn hot, but not so wide that it skips or misses at high speeds, causing that cylinder to drag, or the engine to begin to rattle.

I have mine gapped at 0.6 because my coilpacks are shit and i need new ones, but it fixes my hi-rpm misses, so until i save up for some splitfires i hav to put up with the missing at idle,

So yeah check the gap on your spark plugs, ideally should be 0.8

I have the same idle-popping issue.

Regarding plugs, I've read that the amount of resistance with power getting to the plug can change the ideal gap for your engine. So I guess a lengthy trial-and-error testing period is going to be the best way to get things the way you like them.

Edited by Legumis

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Food for thought, the stock oil filter thread is a 3/4-16 UNF, which has an ID of about 10 to 12mm (according to ChatGPT lol). Now compare than to an 10AN, which has an ID of about 14mm (Raceworks is 14.2mm, Speed flow is 14.27mm).  
    • Yep, totally get that. However hooking in for Generator back up is only a few hundred bucks for the wiring. You could put a couple of those in (for different circuits explicitly) and run a couple of baby generators. Bonus, you can balance them across different circuits, and now have backups in your backup. I'm looking at buying places that won't even have water etc, and I don't mind the idea of getting off the electric grid either, even with everything you've said. This country already has enough power outages that even the mains grid isn't that reliable anymore. I do agree though on spending a bit more to get better gear, and to add some extra redundancy in to the system too.
    • You can set hard reserves on your battery system, and it can't be discharged past that.  
    • That sounds like an excellent idea. But total self-sufficiency means exactly that. You have no-one else to blame when your system faults out and you have no power for a week or two while it gets fixed. You'd have to go the whole hog and get a diesel genny and all the switchover gear, to get you through such times. And, despite the fact that over 20 years, my system has been pretty reliable**, I have seen so many inverter explosions (or less dramatic deaths), panel and roof JB fires, and so on, over that time, to know that the stuff is the same as any other bulk Chinese manufactured stuff. The failure rate is well above zero - both on the equipment and on behalf of the meth addled installation labour force. And then..... warranty and means of redress against the supplier you bought the gear from. Best I can tell is that only a handful of solar companies are still around within 5 years of starting their advertising pitch. They disappear and phoenix like crazy. So, as per 1st paragraph, I suspect the only way to is go balls deep and spend maybe 2-3 times as much as you might think, so that you have every base covered. Plus, know and understand your gear intimately, so you can diagnose problems, sort them out yourself, etc, etc. Plus, probably have to consider upgrading various parts as the years pass, to maintain compatibility with newer stuff, performance and reliability, etc, etc. Whereas, remaining attached to the grid has an ongoing cost that keeps going up even if you use bugger all power from it. But it does provide the fallback in case of the worst case with your own gear. You either pay up front or as you go, I suspect.
    • Add more solar panels to the array. Call the electricity company and tell them you're moving out... Live off grid electric wise
×
×
  • Create New...