Jump to content
SAU Community

Recommended Posts

Im getting a R33 gts-t with just an N1 exhaust and Apexi Super AFC. How much boost can i safely run without an Intercooler and how much once i get an intercooler? And approx. how much power should i expect?

Thanks

Edited by BillyMako
Link to comment
https://www.sau.com.au/forums/topic/161405-r33-gts-t-safe-boost/
Share on other sites

10-12psi mate, same as everyone else :bunny:

Depends what you hit Rich & Retard every car is different... you'll know when you do :D

Power without an ECU, around 160-180rwkw. Could be a bit less. Either way around that.

Checkout the RB25 dyno thread sticky, it pretty much gives you expectations to work from

yeah 12psi or so, i have 4 settings on my boost controller, 7,9, 12 and 14.9 psi. YEEEEPPP 14.9 psi. BUT i only use this when i want to absolutly cane it for a short burst, plus i ensure i monitor teh bosst with my foot.

I don't expect the turbo to last tooo long, but i am only using 14.9 psi for 10 second burts or so.

  • 2 weeks later...
so 11-12psi on stock turbo is fine?

Generally speaking yes this is fine. But for people to say yeah it wont be a problem isnt entirely right. Some peoples turbo have let go at less then this its really luck of the draw. The cars arent new these days so your pushing factory items alot harder then they were intended to. At the end of the day 11 - 12 is generally safe enough but its not to say when you put it on 11 or 12 that it wont shit itself in the first week.

Just a thought.

Im getting a R33 gts-t with just an N1 exhaust and Apexi Super AFC. How much boost can i safely run without an Intercooler and how much once i get an intercooler? And approx. how much power should i expect?

Thanks

Doesn't the R33 Turbo have a small stock intercooler? Or are you referring to an after market intercooler?

Doesn't the R33 Turbo have a small stock intercooler? Or are you referring to an after market intercooler?

He is refering to how much he can run without a better Intercooler. They all have factory intercoolers just arent particularly efficient at much more then standard boost, power.

wats 11-12 psi on guage reading... is that 0.7?

You will want to get yourself a guage reading in psi otherwise if you are intent on trying to run 12psi you will quite possibly run more without realising. A cheap mechanical guage will be all you need. Id keep it to 10psi myself but either way :)

Doesn't the R33 Turbo have a small stock intercooler? Or are you referring to an after market intercooler?

yes it does, a very small side mount intercooler. if i were you, go for the r34 smic, they are slightly bigger and will be sufficient for 200rwkws

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...