Jump to content
SAU Community

Recommended Posts

Basically I've had a couple of friends tell me that the r34 gtt has a 5 speed version of the gtr's getrag gearbox, but i was under the impression that it was pretty much the same as the r33 25det gearbox (and some of the stuff i've read here points that wasy as well).

So...

1. Which actually is it?

2. Will the redline shockproof be okay for it.

3. Will it handle the 300 rwkw i plan to put through it (with a C's short shifter installed as well).

Also, if anyone can recommend a diff oil for the 34 gtt as well that would be good.

Link to comment
https://www.sau.com.au/forums/topic/162412-r34-gtt-gearbox/
Share on other sites

Basically I've had a couple of friends tell me that the r34 gtt has a 5 speed version of the gtr's getrag gearbox, but i was under the impression that it was pretty much the same as the r33 25det gearbox (and some of the stuff i've read here points that wasy as well).

So...

1. Which actually is it?

2. Will the redline shockproof be okay for it.

3. Will it handle the 300 rwkw i plan to put through it (with a C's short shifter installed as well).

Also, if anyone can recommend a diff oil for the 34 gtt as well that would be good.

The R34GTT box is the same as the R33 GTST one, i use them in most conversions as they are low mileage and it gives a little more headroom in the punishment area. We run shockproof in our boxes also. car makes over 300rwkw. I hate short shifters though and refuse to use them, a GTR shifter with the metal ball end is my pick for an improvement.

I also hate pull clutches so i fit push type GTR bellhousings to the GTT boxes.

Link to comment
https://www.sau.com.au/forums/topic/162412-r34-gtt-gearbox/#findComment-3017596
Share on other sites

The casing is much lighter than the R33 ones. I use lightweight shockproof in mine with 270rwkw no probs. Also my box had 200,000+ k's on it before it got into my car.

It has a small problem which I know others have had in that when shifting fast from 4th to 5th at redline (well at any revs really) you can put it into a no mans land between 3rd and 5th gears where it crunches badly. I have had to slow my changes there cos I don't want to blow the box.

Short answer, no nothing like the getrag from the R34 GTR, very much like the R33 GTST.

Link to comment
https://www.sau.com.au/forums/topic/162412-r34-gtt-gearbox/#findComment-3026317
Share on other sites

Can you swap an R34 GTT bellhousing with the R33 GTS-T one mated to the R34 gearbox so that it becomes a push type (just thinking of my rooted gearbox) (also have I got my theory right that this can be done)

yeah i hate pull clutches, so i fit push type housings all the time.

Link to comment
https://www.sau.com.au/forums/topic/162412-r34-gtt-gearbox/#findComment-3026423
Share on other sites

How? Do you cut the bell housings off? How do you reconnect them?

nah they just unbolt, here is a SR20 box that i have removed the bellhousing. RB boxes are the same design.

post-34927-1175665106.jpg

Edited by URAS
Link to comment
https://www.sau.com.au/forums/topic/162412-r34-gtt-gearbox/#findComment-3028967
Share on other sites

I have heard of the brand but never actually seen one in a vehcile. Or being used.

Obviously at idle with your foot off the clutch the only thing thats turning is the input shaft and lay shaft. The rest of the gear set should be unloaded and spinning on their needle rollers happliy.

I have found my Cross mission box to be getting a bit noisy despite being a helical cut set.

Link to comment
https://www.sau.com.au/forums/topic/162412-r34-gtt-gearbox/#findComment-3034936
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...