Jump to content
SAU Community

Recommended Posts

I'd imagine most heat into the manifold would be conducted via the block, and as such there aren't many options for keeping it cool. If your going for an aftermarket plenum then the thinwalled ones(Subzero style) would have less latent heat and cool much quicker.

yer Adam - although this time it's a coil pack.

Given that the wiring harness is also very brittle I suspect that the R did some sustained hard work (ie high engine temps for long periods) in Japland. Finding race harness bolts behind the driver's seat supports this theory.

I'm looking into some Spitfire coils ATM, and plan to keep the center cover off for cooling.

Gav, another thought on cooling the coil packs that I've seen done on an RB25 is to keep the centre cover on, but cut some vent holes in them and stick some painted wire mesh to the underside. The one I saw looked very slick an almost factory. Pretty sure is was on a Silvia featured in one of the recent HPI magazines (with a red R34 GT-R on the front). Will see if I can dig it out and scan in.

Cheers

Brendan

Given that the original coils are now 10 years old (and as I said suspected that they had a hard life), I'd be happy to get 10 years out of a replacement set.

Does anyone have information on the Splitfire coils for the GTR?

Are these a straight plug in replacement that uses factory harness connectors, exciter etc?

There isn't a lot of information around on the GT-R SplitFire coilpacks. They're assumed to be a fairly rare item. They are however a plug-and-pray item. Saw a set installed into Jeff's S15 in about 10mins.

Cheers

Brendan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
×
×
  • Create New...