Jump to content
SAU Community

Recommended Posts

Ok, last night I picked up my PowerFC from Kristian, and I wanted to vouch for a few things ;)

Firstly, EMS *does* go through customs. Secondly, it *does* only take 3 days. Both of these were confirmed by the EMS tracking site that I had a link to. Although, the "customs" section went through immediately, maybe they have some sort of automated scanning/procedure? Either way, my package did not get held up at all by customs but there was a listing for it having gone through.

Thirdly, Kristian is a very helpful and stand up guy. There were big delays in the guys in Japan actually shipping my PowerFC and it was unfortunately out of his hands. But in time it was sent and it was here 3 days later.

Even though he gave me a small discount because I intended on picking it up rather than getting it posted, he offered to post it for free once it got here because he felt bad about the extended delay.

I still went and picked it up anyway though because I couldn't wait any longer! :) Plus I was worried it would be lost or damaged in the post which after waiting so long would be absolutely tragic, and also my girlfriend wanted to go for a drive :)

  • 1 month later...
  • Replies 188
  • Created
  • Last Reply

Top Posters In This Topic

hey, can you get a pair for hks 2530's for a friend of mine he needs them after new years..  whats the price shippeed. i prefer second hand with no damage and low kms...

Yes I can, I assume this is for a GTR.

I will PM you with a price.

Kristian

since your pm is full i had to post it here

I need pricing on the following and depending on price i'll let u know if i want them

hks 25/30 turbo brand new or second hand

garret gt25/30

sard 550cc with collars

nismo 555cc with collars

hks stage 1 cams

can u try to get tomie cam gears or any other good ones

1.2mm hks metal headgasket

s13 carbon fibre bonnet

bosh or walbro fuel pump kit

nismo or any other brand fuel regulator

this is all for a sr20det redtop thanx alot mate

hey supra man..

i have asked friends for stuff they need and also i need some stuff...

All second hand :

HKS GT2530X2 - previously asked.

apexi pfc for rb26dett r33

700cc injectors ( something good but cheap ) for rb26dett (x6)

large high flow intercooler

metal head for bcnr33 .

high performance oil cooler for bcnr33.

my things that i am buying is the hks cooler.

i would be happy if you give me a pm with the best prices ..

Cheers

  • 2 years later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
    • Hi all,I already introduced myself in the Victoria section, but only saw this section now lol XD New to forums and new to skylines. Hoping to buy my new skyline within October
×
×
  • Create New...