Jump to content
SAU Community

Recommended Posts

1991 Nissan Skyline GTR R32

5 Speed Manual

RB26DETT

42,563 km

Champagne Gold

ENKEI Wheels

Aftermarket Exhaust

Larger Radiator

This car has only had one owner and no accident history. There is a few scratches on the front bar, but otherwise the car is in good condition all round.

A full mechanical report and more pictures while the car is still in Japan can be arranged for buyer.

Please PM or contact 0403596801 for more information

$18,000 Landed and Complied in Melbourne, Victoria

post-14134-1175436201.jpgpost-14134-1175436191.jpgpost-14134-1175436179.jpg

Link to comment
https://www.sau.com.au/forums/topic/162808-1991-nissan-skyline-r32-gtr/
Share on other sites

its only had the one owner, but then again nismo speedo's are usually fitted at later stages after purchase. I'll check whether the timing belt has been done or anything else to give hints about the original kms.

its only had the one owner, but then again nismo speedo's are usually fitted at later stages after purchase. I'll check whether the timing belt has been done or anything else to give hints about the original kms.

means its done 2660kms a year for the past 16 years.

Its prob close to 240 000 km (working on a low average 15km/year), and has done 2 timming belts on its way to its third.

means its done 2660kms a year for the past 16 years.

Its prob close to 240 000 km (working on a low average 15km/year), and has done 2 timming belts on its way to its third.

As much as i'm tempted I dont think i'll waste my time trying to justify that lovely piece of calculating!

As much as i'm tempted I dont think i'll waste my time trying to justify that lovely piece of calculating!

Brilliant isn't it? But please by all means help yourself! I will love to know where i went wrong.

means its done 2660kms a year for the past 16 years.

Its prob close to 240 000 km (working on a low average 15km/year), and has done 2 timming belts on its way to its third.

well for a start xskape, whilst i agree with you that it does seem very low... would usually only expect old show cars to be at that figure, i would be certain it does would not have been doing anywhere near 15000km/yr (i persume your immature mind meant 15000 rather than 15km). most japanese cars are used far less than australian due to their dense populations and high road costs, not to mention articulate public transport means.

I myself bought a r32 gtr, it had its timing belt changed shortly before selling (as the jap owner provided proof).

All jap cars come with a lot lower kms than any aussie clown would expect, but i havent had a single issue with mine mechanically, so as long as you trust the seller, it probably is legit, if not close to the truth

Always a tool wanting to sabotage a for sale thread with his wit and carnizzma.

Personally i dont believe the hype with KM reductions . I know it happens to some but there's no need to go bombing the guys advertisment with some lame theory .

Edited by ish
well for a start xskape, whilst i agree with you that it does seem very low... would usually only expect old show cars to be at that figure, i would be certain it does would not have been doing anywhere near 15000km/yr (i persume your immature mind meant 15000 rather than 15km). most japanese cars are used far less than australian due to their dense populations and high road costs, not to mention articulate public transport means.

I myself bought a r32 gtr, it had its timing belt changed shortly before selling (as the jap owner provided proof).

All jap cars come with a lot lower kms than any aussie clown would expect, but i havent had a single issue with mine mechanically, so as long as you trust the seller, it probably is legit, if not close to the truth

well i guess your another sucker that fell for the quote "cars are used alot less in Japan". Yes they are used slightly less. but not as low as they claim. Just match up the Km's on the odometer to the body and the interior. If they park thier car all day and don't drive it? Why does it look like shit? But having siad that a good detalier can make a peice of shit into a birthday cake.

There is plenty of ways to provide dodgey proof. Know a mechanic is one. And when your asian everyone knows everyone.

One of my good mates is Japanesse who lived there for 20+ years then migrated to Australia.. blah blah blah but to cut a long story short he has confirmed km’s have been wound back prior to auction. Because these sucker aussies love it. As an importer/car seller, if you didn’t do it and it was done in Japan, your hands are clean!

As a car seller always be honest. You'll get more respect and more likely be able to get the sale

As a car buyer. Don't trust anyone! or believe everything you hear or see.

Always a tool wanting to sabotage a for sale thread with his wit and carnizzma.

Personally i dont believe the hype with KM reductions . I know it happens to some but there's no need to go bombing the guys advertisment with some lame theory .

Always another tool adding his 2 cents worth.

well for a start xskape, whilst i agree with you that it does seem very low... would usually only expect old show cars to be at that figure, i would be certain it does would not have been doing anywhere near 15000km/yr (i persume your immature mind meant 15000 rather than 15km). most japanese cars are used far less than australian due to their dense populations and high road costs, not to mention articulate public transport means.

I myself bought a r32 gtr, it had its timing belt changed shortly before selling (as the jap owner provided proof).

All jap cars come with a lot lower kms than any aussie clown would expect, but i havent had a single issue with mine mechanically, so as long as you trust the seller, it probably is legit, if not close to the truth

I have friends living in Japan and what you say is very true. Public transport works very well, tolls are ridiculously expensive, densely populated and far far smaller. Australians drive their cars pretty well far more than anyone else. Fearful Aussie will never understand that, and only they lose out buyer higher km cars to make themselves feel better! I bought a 1985 RX7 with 45k on it. Everything was like new. A mate living over there now has a 1993 RX7 with only 35k on it. Did 3k a year for the first 7 years of it's life.

Stop discrediting peoples sales. If you are scared, ignore the speedo and judge a car on its condition alone. Stop with the annoying fear mongering.

"As a car buyer. Don't trust anyone! or believe everything you hear or see."

You'll never buy a car if you can't trust your own eyes or judgement. And you do better using that than some perceived expert workshops.

Edited by GT-R32

hi, if you are commercially importing cars for sale, please contact Blitz or Prank via pm to enquire about becoming a subscribed trader on this forum.

I would also suggest that offering cars for sale that you do not have in your possesion is not a good idea.

to the rest of the people posting in this thread I'd suggest refreshing yourselves with the forum rules. They are posted at the top of the For Sale section. Break them again and I hand you a little spanking. don't post your problems, thoughts, arguments, abuse, stories etc in someones for sale thread.

thread has been left open for the time being.

Like I said I will find out the details.

And we've found a timing belt sticker, which was replaced at 92,000 kms begining of 2006! So we'd be looking at over or around 110,000 - 120,000km but yeah... nothing near your calculated 240,000 km!! There's so much more to say, but wat is the point arguing with comments like that in the first place!!

I am going to become a sponser, I havent made any profits as yet if I do sell anything I will become an immediate sponser. But for now my business is still in the making and should be all ready in next couple of weeks.. Once it is actually up and running, I will become a sponser whether I've made a sale or not, and advertise many vehicles available in Japan.

Thanks

Closed.

Sorry mate, but the bottom line here is you are a business and as per the rules you must pay and become a business trader before you advertise your cars or parts on this forum.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...