Jump to content
SAU Community

Recommended Posts

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Didn't another skyline crash there last year I remember reading on here?? Thing is even if you change lanes a bit fast and flick it bick a bit hard you can get a bit of a parallex skid happening.

Worst thing about skids is you don't actually know its skating until you feel it kick back, by which time it could be too late :) :)

i lost my 31 at 140kmh going over the top of a hill in taradale,would have done 12 360's,managed to keep it off the dirt walls either side,only thing that saved us was the abs i reckon,come inches away from each wall,but i corrected her nicely.last time i go silly in the wet at high speeds,low speeds well that a different story nothing like lock to lock in a liner.

ps: dont buy hankook tyres they suck all round

Originally posted by R34GTT-R

maximum braking without locking up all four,must of helped coz im still here writing this sh!t,without abs i woulda had the 4 locked up and at 140kmh i would slid till something stopped me (wall or tree)

correct me if im wrong someone(with proof), but i dont think the fact that u had abs would have made a difference if you did 12 360's. how did u know you did 12, did you count them as you went round?

Originally posted by Ender

Anyone who loses it on the freeway fullstop is a dickhead...it dosen't get much easier than driving up a five lane divided bitumen rd does it??

fullstop? so even if he was cut off and had to swerve to miss, or if someone braked heavily in front of them and swerving to miss was the only option?

are they still dickheads?

fullstop? so even if he was cut off and had to swerve to miss, or if someone braked heavily in front of them and swerving to miss was the only option?  

are they still dickheads?

Hmmm.. isn't one of hte first things they teach you when driving is to always drive to allow for others mistakes?? If you are driving too close... or sitting parallel next to another car doing exactly the same speed then well ..

Anyway, none of us were there, so of course its impossible to pass judgement on how the driver was driving, or why it did occur.

thats what i mean...but when its raining its a lot harder to keep an eye on everything that goes on...if its raining really heavy its normally dark..ie lights are needed...not everyone turns on their lights because its not night time...i guess my point is, it might not be the drivers fault that was involved in the accident

Originally posted by sniffy

correct me if im wrong someone(with proof), but i dont think the fact that u had abs would have made a difference if you did 12 360's. how did u know you did 12, did you count them as you went round?

Had a full car load so that was the overall guesstimate averaged.

point of my story is its stupid to go fanging ur car in the wet at high speeds.i was lucky unlike that other poor prick on the freeway.

yep, I believe you can fairly easily anticipate and allow for other peoples mistakes. I guess if you had a fairly catastophic blowout or mechanical failure you may be excused...so maybe not fullstop...but almost. In my job I have the opportunity of reviewing many car accidents and I would say 99.99999% of them are due to preventable driver error. Mate people mostly do a really stupid thing or aren't thinking....most accidents shouldn't be called accidents...they should be called stupids.

Point taken though...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...