Jump to content
SAU Community

Recommended Posts

The odd thing about it is the rust - not something you would expect on a 1998 japanese car that had been even reasonably looked after. Possible kept outdoors by the sea? Who know. It's also a very low price - sign of a really good bargin, or something to stay away from - hard to tell...

Spotted this, looks rough, but damn cheap! http://www.prestigemotorsport.com.au/modul...hp?StockID=4271

My 2cents, I got one of these same color etc., looks like it may have been submerged but for the price could be worth parting out? Ifnya keen.

cheers :)

Its been hanging around on J-Spec for a while but not a this price. I just got home and had the email from Prestige in my inbox. The interior looks great as does most of the exterior. Its not that uncommon to find rust on suspension towers of imports (my last 2 180's have had this problem) but not usually that bad. If it was caused by the elements or something I would expect to see rust on other areas of the car. Maybe some fluid was spilt (like brake fluid, I know I have sat bottles of brake fluid on suspension towers before, not a good idea!!) and has corroded the paint causing it to rust. But for $16, 000 its well worth spending some money on as it still came in as a 3.4 grade so the rest of the car must be pretty good. Shit even if its not once it gets here you could part it out for that price. I just wish I had that money. Anyone want to by my RS4???? No seriously :) And i'll buy it!! Its not going to last long though.

Hmmm don't think I'd be shelling out anything. It's rusty, and if it's rusty in one place it wont be long before it'll appear in others. Probably wouldn't get through comliance, (shouldn't anyway). Looks like it's had a low maintenance life. My Falcon with 330,000 looks cleaner under the bonnet than this thing. Even for that price, a high performance motor with 140,000 (genuine??) km's, would need rebuilding. Looks like a very expensive restoration job to me. For just the cost of the engine rebuild alone (+ the cost of this) you can find a nice one.

The rust in the strut towers is not unusual

Due to poor building in the factory

If you look closely the seam sealant does not cover the join/overlap line in the layers of metal on the tower

So over time water/salt gets in and the rust grows

I just repainted my series 2 engine bay and found very minor rust starting in the same spot right along the seam line. You could see the seam sealant was not applied correctly allowing water/moisture to get in.

It would be worth everyone checking their car for the same signs. Also check all the seam lines in the engine bay as I had some minor rust spots between the tower and firewall aswell.

It would be almost impossible to stop/repair that rust now in that 260RS. You would have to replace the strut towers. So I dealt any compliance shop would let that car past inspection.

Yeah you can see in the first pic of the rust, a crack comes out from the seam to one of the larger spots of rust. Don't know about the random spots around it though as these are no where near the seams. The other tower doesn't look to bad at all but would like a closer look with the tower brace off! You would expect to spend money on the car when it got here. Probably a re spray (depending on what the rest of the body is like) and there would be some mechanical work to do but it does look dead stock, but the Japanese aren't exactly known for the regular service intervals :dry: There is another one there for a little over $20G too. That was the one I said had been around for a while, got it confused with this one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
×
×
  • Create New...