Jump to content
SAU Community

Recommended Posts

Over drive OFF, power button ON.

Step on the break, rev up to about 2000-2,500 REVs.

Let go off the break and step on it.

:pwned:

For a stock converter practice with various revs between 2000-2600rpm, & also don't rev till the last few seconds otherwise trans temps will soar faster than you can say 'V-TEC power yo!'.

:pwned:

For a stock converter practice with various revs between 2000-2600rpm, & also don't rev till the last few seconds otherwise trans temps will soar faster than you can say 'V-TEC power yo!'.

Yeah... also don't do this shit on every set of lights lol (I mean at the track) :pwned:

I have an Automatic... I chosen it as a preference as Auto's launch just as good as Manual if you know how... and in a straight line (with good mods), Autos will beat Manuals...

HEre's what you do...

OVER DRIVE OFF, POWER BUTTOM PRESSSED, MAke sure you are running High Octane fuel (I personally like BP'S ULTIMATE)... Put it on DRIVE... Hold the BRAKE... REV TO AROUND 3,000 RPM's... LEt go of the BRAKE, step on it until around 4,000 RPM's and then pull it back to 2nd Gear to maintain the REV's at around 5-6,000 RPM's... then you just hold on it and pull it back just before you redline it... this is pushing the car to it's full potential.. most races are quater mile... do the above right and you will OWN....

I've always wondered about that... how does a burnout work in a AWD car such as the GT-R? Is it even possible without wreaking the ATTESA and seriously heating up the oils in the diffs/clutches?

If you are going to push your auto at the lights by holding high revs on the brakes, you should first fit a auto trans cooler because you will be generating a lot of heat which is the best way to kill an auto trans. A few hundred insurance against a few thousand for repairs.

Over drive OFF, power button ON.

Step on the break, rev up to about 2000-2,500 REVs.

Let go off the break and step on it.

I've always wondered too how the Autos do it, as I'm in a manual I dont get it.

If you put it in DRIVE and rev to 3000 and hold the brake, wouldnt that just make the car do a burnout while at a standstill?

Then if you let go of the brake you'll just get wheelspin and take off?

I've always wondered too how the Autos do it, as I'm in a manual I dont get it.

If you put it in DRIVE and rev to 3000 and hold the brake, wouldnt that just make the car do a burnout while at a standstill?

Then if you let go of the brake you'll just get wheelspin and take off?

If you dont rev over 2500 revs the car just barely creeps forward. Hence why in the auto revving around 2000 rpm is the best.

When you let go off the brakes, you will hit boost much quicker (3500 revs) hence a better take off. At the end of the day if you have good tyres, there wont be a big burnout... however this all depends on like I said tyres and how much power you run.

My car is stock btw.

I have an Automatic... I chosen it as a preference as Auto's launch just as good as Manual if you know how... and in a straight line (with good mods), Autos will beat Manuals...

HEre's what you do...

OVER DRIVE OFF, POWER BUTTOM PRESSSED, MAke sure you are running High Octane fuel (I personally like BP'S ULTIMATE)... Put it on DRIVE... Hold the BRAKE... REV TO AROUND 3,000 RPM's... LEt go of the BRAKE, step on it until around 4,000 RPM's and then pull it back to 2nd Gear to maintain the REV's at around 5-6,000 RPM's... then you just hold on it and pull it back just before you redline it... this is pushing the car to it's full potential.. most races are quater mile... do the above right and you will OWN....

Keep that up and u will destroy ur transmission in no time.

thanks guys. been meaning to ask this question but keep forgetting that i wanna know. is it possible to do a standstill burnout in an auto as well?

Fully depress the break, then fully depress the accelerator and u will start spinning the wheels (or maybe 1 if u have a worn out lsd :(. Back off before u change gears or this will stop the burnout.

I've always wondered about that... how does a burnout work in a AWD car such as the GT-R? Is it even possible without wreaking the ATTESA and seriously heating up the oils in the diffs/clutches?

personally I just dont bother. If you *must* be fulli sik get one of thoes awd -> 2wd switch's that go's in the fuse box, if you have a 32, or dont bother, if you have a 33 - 34

I've always wondered too how the Autos do it, as I'm in a manual I dont get it.

If you put it in DRIVE and rev to 3000 and hold the brake, wouldnt that just make the car do a burnout while at a standstill?

Then if you let go of the brake you'll just get wheelspin and take off?

Use the handbrake. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
    • Murphy strikes again! Nothing at all would have gone wrong if you had the tool kit in the car! You'd have just found the clamp loose the next time you went to touch it...
    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
×
×
  • Create New...