Jump to content
SAU Community

Recommended Posts

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

for humour

ecu $1500 tuned

turbos $3000 fitted

tyres $1000

clutch $1200

strip interior $1000

no exhaust $1000

fuel upgrade $1000

cold air / intake setup $500

nos kit $600

4wd upgrade $800

afm upgrade $800

4wd controller $350

it will fail on stock internals

ECU, big turbo/s, NOS kit, clutch and some injectors less than 5k = stolen hardware or not possible

the ecu alone is $1000 untuned

big turbos $3000 a pair

nos kit is $600 ish

clutch is $1200

Turbos 2860-5 - $2500

ECU - $1000

Injectors - $700

AFM - $600

Fuel pump - $200

Exhaust - $700

Clutch - $1200

6900. Thats not including anything else you'll need to replace along the way.

Or the tyres you need to race on

For 5k, i say it cant be done. Even if you used 2nd hand parts. Its still out of reach

You dont need NOS to run a 10.99

ECU, big turbo/s, NOS kit, clutch and some injectors less than 5k = stolen hardware or not possible

the ecu alone is $1000 untuned

big turbos $3000 a pair

nos kit is $600 ish

clutch is $1200

hmm, maybe if you buy all ur products brand new....

you can get a good set of second hand HKS GT2530 for under 2k (dont know if they will be big enough), that price inc of shipping and buyers fee (buying from yahoo auctions)....

but having said that, i personal don't think it can be done even with second hand parts...

Twin Turbos $2000-$2500 (or $3000-$3500 for second hand hks t51r or similar turbo kit)

then you have ecu (min $900 for pfc + $300 to $500 for tuning = 1.5k)

maybe smash in a FPR turn up the pressure as much as you can and hope the stock clutch holds up LOL!

yes ok, i forgot about the fuel.

but assuming you scored the gear cheap secondhand, chinese turbos no intake filtration etc, dodgy hack togeather plumbing, decent wet nos can had for under $400 second hand yeah? surely a clutch to hold it could be had for 1k ay? and all this only has to hold togeather for a short time... how many kw is needed to get in to 10`s?

hmm, maybe if you buy all ur products brand new....

you can get a good set of second hand HKS GT2530 for under 2k (dont know if they will be big enough), that price inc of shipping and buyers fee (buying from yahoo auctions)....

but having said that, i personal don't think it can be done even with second hand parts...

Twin Turbos $2000-$2500 (or $3000-$3500 for second hand hks t51r or similar turbo kit)

then you have ecu (min $900 for pfc + $300 to $500 for tuning = 1.5k)

maybe smash in a FPR turn up the pressure as much as you can and hold the stock clutch holds up LOL!

a pair of 2530s with

stock fuel rail

stock injectors

stock pump

stock clutch

wont even pass tuning, it will lean out off the planet and go boom

a pair of 2530s with

stock fuel rail

stock injectors

stock pump

stock clutch

wont even pass tuning, it will lean out off the planet and go boom

rofl he never said it was ment to last :)

ps i know its not possible im just throwing wild ideas up in the air LOL! how much pressure can the stock fuel line hold?

sure it would be fun to try but it wont happen

and an xr6t i dont think could get into 10s under 5k

they apss kits to get 10sec are like 20k

im pretty sure i saw a stock turbo'd xr6t do a 10second pass (article on autospeed i think). 20K is over the top, if you put it together yourself you could do it under 10K easy.

why has everyone gone for twins on a 'cheap' drag setup ?

go for a big single (garrett off the shelf). injectors, map sensor PFC, clutch, exhaust and ALOT of nos. i rekon you MIGHT just scrape in under 5K, with some second hand parts :)

im pretty sure i saw a stock turbo'd xr6t do a 10second pass (article on autospeed i think). 20K is over the top, if you put it together yourself you could do it under 10K easy.

why has everyone gone for twins on a 'cheap' drag setup ?

go for a big single (garrett off the shelf). injectors, map sensor PFC, clutch, exhaust and ALOT of nos. i rekon you MIGHT just scrape in under 5K, with some second hand parts :)

exactly, and forget the xr6t, the cars that go into the 10`s have alot of money spent... but still on the stock gt3540 with ported wastegate mind you...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't think there's any way someone is push starting this car.. I honestly can barely move it, and moving it and steering it is just flat out not possible. I'm sure it is, but needs a bigger man than me. I have a refurbished starter now. The starter man was quite clear and consise showing me how nothing inside a starter really should contribute to slow cranking, and turned out that for the most part... my starter was entirely fine. Still, some of the wear items were replaced and luckily it didn't show any signs of getting too hot, being unfit for use, etc. Which is 'good'. I also noticed the starter definitely sounded different, which is a bit odd considering nothing should have really changed there.... Removed and refit, and we'll pretend one of the manifold bolts didn't fully tighten up and is only "pretty" tight. GM only wants 18ft/lb anyway. I also found a way to properly get my analog wideband reading very slightly leaner than the serial wideband. There's Greg related reasons for this. The serial output is the absolute source of truth, but it is a total asshole to actually stay connected and needs a laptop. The analog input does not, and works with standalone datalogging. Previously the analog input read slightly richer, but if I am aiming at 12.7 I do not want one of the widebands to be saying 12.7 when the source of truth is 13.0. Now the source of truth will be 12.65 and the Analog Wideband will read 12.7. So when I tune to 12.7 it'll be ever so slightly safer. While messing with all of this and idling extensively I can confirm my car seems to restart better while hot now. I did add an old Skyline battery cable between the head and the body though, though now I really realise I should have chosen the frame. Maybe that's a future job. The internet would have you believe that this is caused by bad grounds. In finding out where my grounds actually were I found out the engine bay battery post actually goes to the engine, as well as a seperate one (from the post) to the body of the car. So now there's a third one making the Grounding Triangle which is now a thing. I also from extensive idling have this graph. Temperature (°C) Voltage (V) 85 1.59 80 1.74 75 1.94 70 2.1 65 2.33 60 2.56 55 2.78 50 2.98 45 3.23 40 3.51 35 3.75 30 4.00   Plotted it looks like this. Which is actually... pretty linear? I have not actually put the formula into HPTuners. I will have to re-engage brain and/or re-engage the people who wanted more data to magically do it for me. Tune should be good for the 30th!
    • There are guys on Facebook under, Infiniti Owners Australia   https://www.facebook.com/share/g/1Z3RbPqx4k/?mibextid=wwXIfr What Whp are you after and I can help, and join this Q group in the states. https://www.facebook.com/share/g/19A59cN3JR/?mibextid=wwXIfr
    • Does any of you guys have instagram pages for your builds? Keen to see some Aussie builds. I still can't figure out how to post photos in here.
    • That awesome thanks for that. 
    • You can Remote any of these VR30..globally  Check: AMS Performance | Racebox | Sonic Tune | Soho | Z Motorsports | Specialty Z    Performance Parts | AMS | Z Motorsports | Boosted 6 |    Exhaust | Fast Intentions | ARK | MBRP Motordyne | Borla    There is someone in Sydney with 650whp   I am at 430whp without flex fuel, but FBO & Flex-fuel will push you to 500whp!!  
×
×
  • Create New...