Jump to content
SAU Community

Recommended Posts

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

for humour

ecu $1500 tuned

turbos $3000 fitted

tyres $1000

clutch $1200

strip interior $1000

no exhaust $1000

fuel upgrade $1000

cold air / intake setup $500

nos kit $600

4wd upgrade $800

afm upgrade $800

4wd controller $350

it will fail on stock internals

ECU, big turbo/s, NOS kit, clutch and some injectors less than 5k = stolen hardware or not possible

the ecu alone is $1000 untuned

big turbos $3000 a pair

nos kit is $600 ish

clutch is $1200

Turbos 2860-5 - $2500

ECU - $1000

Injectors - $700

AFM - $600

Fuel pump - $200

Exhaust - $700

Clutch - $1200

6900. Thats not including anything else you'll need to replace along the way.

Or the tyres you need to race on

For 5k, i say it cant be done. Even if you used 2nd hand parts. Its still out of reach

You dont need NOS to run a 10.99

ECU, big turbo/s, NOS kit, clutch and some injectors less than 5k = stolen hardware or not possible

the ecu alone is $1000 untuned

big turbos $3000 a pair

nos kit is $600 ish

clutch is $1200

hmm, maybe if you buy all ur products brand new....

you can get a good set of second hand HKS GT2530 for under 2k (dont know if they will be big enough), that price inc of shipping and buyers fee (buying from yahoo auctions)....

but having said that, i personal don't think it can be done even with second hand parts...

Twin Turbos $2000-$2500 (or $3000-$3500 for second hand hks t51r or similar turbo kit)

then you have ecu (min $900 for pfc + $300 to $500 for tuning = 1.5k)

maybe smash in a FPR turn up the pressure as much as you can and hope the stock clutch holds up LOL!

yes ok, i forgot about the fuel.

but assuming you scored the gear cheap secondhand, chinese turbos no intake filtration etc, dodgy hack togeather plumbing, decent wet nos can had for under $400 second hand yeah? surely a clutch to hold it could be had for 1k ay? and all this only has to hold togeather for a short time... how many kw is needed to get in to 10`s?

hmm, maybe if you buy all ur products brand new....

you can get a good set of second hand HKS GT2530 for under 2k (dont know if they will be big enough), that price inc of shipping and buyers fee (buying from yahoo auctions)....

but having said that, i personal don't think it can be done even with second hand parts...

Twin Turbos $2000-$2500 (or $3000-$3500 for second hand hks t51r or similar turbo kit)

then you have ecu (min $900 for pfc + $300 to $500 for tuning = 1.5k)

maybe smash in a FPR turn up the pressure as much as you can and hold the stock clutch holds up LOL!

a pair of 2530s with

stock fuel rail

stock injectors

stock pump

stock clutch

wont even pass tuning, it will lean out off the planet and go boom

a pair of 2530s with

stock fuel rail

stock injectors

stock pump

stock clutch

wont even pass tuning, it will lean out off the planet and go boom

rofl he never said it was ment to last :)

ps i know its not possible im just throwing wild ideas up in the air LOL! how much pressure can the stock fuel line hold?

sure it would be fun to try but it wont happen

and an xr6t i dont think could get into 10s under 5k

they apss kits to get 10sec are like 20k

im pretty sure i saw a stock turbo'd xr6t do a 10second pass (article on autospeed i think). 20K is over the top, if you put it together yourself you could do it under 10K easy.

why has everyone gone for twins on a 'cheap' drag setup ?

go for a big single (garrett off the shelf). injectors, map sensor PFC, clutch, exhaust and ALOT of nos. i rekon you MIGHT just scrape in under 5K, with some second hand parts :)

im pretty sure i saw a stock turbo'd xr6t do a 10second pass (article on autospeed i think). 20K is over the top, if you put it together yourself you could do it under 10K easy.

why has everyone gone for twins on a 'cheap' drag setup ?

go for a big single (garrett off the shelf). injectors, map sensor PFC, clutch, exhaust and ALOT of nos. i rekon you MIGHT just scrape in under 5K, with some second hand parts :)

exactly, and forget the xr6t, the cars that go into the 10`s have alot of money spent... but still on the stock gt3540 with ported wastegate mind you...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...