Jump to content
SAU Community

Recommended Posts

?????

there is an r34 gtr in perth running a Trust T88 turbo and a nismo plenum, so i dont understand why you shouldnt

Hmm, how about because they cost a large lump of money & don't do a great deal to help your motor.

Things to think about:

1. The most convincing reason to run a single throttle body is to allow a MAP sensor to work in a more stable airflow environment, ie allow it to work better.

2. If you are running AFM's the half the reason disappears.

3. What else can you do with the $1000 odd dollars?

4. As mentioned the closer the throttle butterfly(s) are to the motor itself the better the throttle response will be.

5. The Group A cars ran the manifold with out mods so how about "It was good enough to win three SATCC's & two Bathursts" as an argument?

6. I think bkc meant coherent rather than cogent. To ne a cogent reply would entail it having a persuasive argument in one direction rather than the more balanced approach that was taken.

Hmm, how about because they cost a large lump of money & don't do a great deal to help your motor.

Things to think about:

1. The most convincing reason to run a single throttle body is to allow a MAP sensor to work in a more stable airflow environment, ie allow it to work better.

2. If you are running AFM's the half the reason disappears.

3. What else can you do with the $1000 odd dollars?

4. As mentioned the closer the throttle butterfly(s) are to the motor itself the better the throttle response will be.

5. The Group A cars ran the manifold with out mods so how about "It was good enough to win three SATCC's & two Bathursts" as an argument?

6. I think bkc meant coherent rather than cogent. To ne a cogent reply would entail it having a persuasive argument in one direction rather than the more balanced approach that was taken.

This money of them it needs the hunk and the flag & Dob respects your motor and because it does not do with the proposal the Hmm, as summary. Approximately will think,:

1. It works inside the air current environment which is stabilized and the ie and understanding the reason which runs the agency body which is simple works well and it it puts it permits the map sensor.

2. When you run the AFM anti- and the reason disappears.

3. It spreads out what of that outside and $1000 odd it is and in the dollar to do it is good?

4. When being under referring, compared to, kkap in agency butterfly (s) motor form compared to sickle agency answer back.

5. "Regarding it 3 SATCC's& 2Bathursts" it was winning enough it is good in argument and to peel as group A it ran the multiengine like this from in the mods which it kicks?

6. Me by the bkc the cohesion characteristic which means rather it is appropriate and it thinks. The answer which will be appropriate connecting was rather adopted the assertion convincingness inside 1 direction it it is compared to process percentage approach head percentage theyn the place.

Fixed.

Check out Hypertune for their plenums as all of the current fast GTR's run and the soon to be returning GTR-700 use them.

They come in 90mm and 102mm. hope that helps

Thank you very much .

thank you so much for your time :)

This money of them it needs the hunk and the flag & Dob respects your motor and because it does not do with the proposal the Hmm, as summary. Approximately will think,:

1. It works inside the air current environment which is stabilized and the ie and understanding the reason which runs the agency body which is simple works well and it it puts it permits the map sensor.

2. When you run the AFM anti- and the reason disappears.

3. It spreads out what of that outside and $1000 odd it is and in the dollar to do it is good?

4. When being under referring, compared to, kkap in agency butterfly (s) motor form compared to sickle agency answer back.

5. "Regarding it 3 SATCC's& 2Bathursts" it was winning enough it is good in argument and to peel as group A it ran the multiengine like this from in the mods which it kicks?

6. Me by the bkc the cohesion characteristic which means rather it is appropriate and it thinks. The answer which will be appropriate connecting was rather adopted the assertion convincingness inside 1 direction it it is compared to process percentage approach head percentage theyn the place.

Fixed.

I am sure that took quite a bit of effort. It demonstrates that you are a very strange man.

or, to put it another way

Effort large conform to taking. Personage for not ideal unstrangeness.

I am sure that took quite a bit of effort. It demonstrates that you are a very strange man.

or, to put it another way

Effort large conform to taking. Personage for not ideal unstrangeness.

I don't understand what do you mean!!

Hmm, how about because they cost a large lump of money & don't do a great deal to help your motor.

Things to think about:

1. The most convincing reason to run a single throttle body is to allow a MAP sensor to work in a more stable airflow environment, ie allow it to work better.

2. If you are running AFM's the half the reason disappears.

3. What else can you do with the $1000 odd dollars?

4. As mentioned the closer the throttle butterfly(s) are to the motor itself the better the throttle response will be.

5. The Group A cars ran the manifold with out mods so how about "It was good enough to win three SATCC's & two Bathursts" as an argument?

6. I think bkc meant coherent rather than cogent. To ne a cogent reply would entail it having a persuasive argument in one direction rather than the more balanced approach that was taken.

The trust T88 , 1050 hp muximum but nismo plenum 650 -700 hp air input nearly !!!! :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...