Jump to content
SAU Community

Recommended Posts

?????

there is an r34 gtr in perth running a Trust T88 turbo and a nismo plenum, so i dont understand why you shouldnt

Hmm, how about because they cost a large lump of money & don't do a great deal to help your motor.

Things to think about:

1. The most convincing reason to run a single throttle body is to allow a MAP sensor to work in a more stable airflow environment, ie allow it to work better.

2. If you are running AFM's the half the reason disappears.

3. What else can you do with the $1000 odd dollars?

4. As mentioned the closer the throttle butterfly(s) are to the motor itself the better the throttle response will be.

5. The Group A cars ran the manifold with out mods so how about "It was good enough to win three SATCC's & two Bathursts" as an argument?

6. I think bkc meant coherent rather than cogent. To ne a cogent reply would entail it having a persuasive argument in one direction rather than the more balanced approach that was taken.

Hmm, how about because they cost a large lump of money & don't do a great deal to help your motor.

Things to think about:

1. The most convincing reason to run a single throttle body is to allow a MAP sensor to work in a more stable airflow environment, ie allow it to work better.

2. If you are running AFM's the half the reason disappears.

3. What else can you do with the $1000 odd dollars?

4. As mentioned the closer the throttle butterfly(s) are to the motor itself the better the throttle response will be.

5. The Group A cars ran the manifold with out mods so how about "It was good enough to win three SATCC's & two Bathursts" as an argument?

6. I think bkc meant coherent rather than cogent. To ne a cogent reply would entail it having a persuasive argument in one direction rather than the more balanced approach that was taken.

This money of them it needs the hunk and the flag & Dob respects your motor and because it does not do with the proposal the Hmm, as summary. Approximately will think,:

1. It works inside the air current environment which is stabilized and the ie and understanding the reason which runs the agency body which is simple works well and it it puts it permits the map sensor.

2. When you run the AFM anti- and the reason disappears.

3. It spreads out what of that outside and $1000 odd it is and in the dollar to do it is good?

4. When being under referring, compared to, kkap in agency butterfly (s) motor form compared to sickle agency answer back.

5. "Regarding it 3 SATCC's& 2Bathursts" it was winning enough it is good in argument and to peel as group A it ran the multiengine like this from in the mods which it kicks?

6. Me by the bkc the cohesion characteristic which means rather it is appropriate and it thinks. The answer which will be appropriate connecting was rather adopted the assertion convincingness inside 1 direction it it is compared to process percentage approach head percentage theyn the place.

Fixed.

Check out Hypertune for their plenums as all of the current fast GTR's run and the soon to be returning GTR-700 use them.

They come in 90mm and 102mm. hope that helps

Thank you very much .

thank you so much for your time :)

This money of them it needs the hunk and the flag & Dob respects your motor and because it does not do with the proposal the Hmm, as summary. Approximately will think,:

1. It works inside the air current environment which is stabilized and the ie and understanding the reason which runs the agency body which is simple works well and it it puts it permits the map sensor.

2. When you run the AFM anti- and the reason disappears.

3. It spreads out what of that outside and $1000 odd it is and in the dollar to do it is good?

4. When being under referring, compared to, kkap in agency butterfly (s) motor form compared to sickle agency answer back.

5. "Regarding it 3 SATCC's& 2Bathursts" it was winning enough it is good in argument and to peel as group A it ran the multiengine like this from in the mods which it kicks?

6. Me by the bkc the cohesion characteristic which means rather it is appropriate and it thinks. The answer which will be appropriate connecting was rather adopted the assertion convincingness inside 1 direction it it is compared to process percentage approach head percentage theyn the place.

Fixed.

I am sure that took quite a bit of effort. It demonstrates that you are a very strange man.

or, to put it another way

Effort large conform to taking. Personage for not ideal unstrangeness.

I am sure that took quite a bit of effort. It demonstrates that you are a very strange man.

or, to put it another way

Effort large conform to taking. Personage for not ideal unstrangeness.

I don't understand what do you mean!!

Hmm, how about because they cost a large lump of money & don't do a great deal to help your motor.

Things to think about:

1. The most convincing reason to run a single throttle body is to allow a MAP sensor to work in a more stable airflow environment, ie allow it to work better.

2. If you are running AFM's the half the reason disappears.

3. What else can you do with the $1000 odd dollars?

4. As mentioned the closer the throttle butterfly(s) are to the motor itself the better the throttle response will be.

5. The Group A cars ran the manifold with out mods so how about "It was good enough to win three SATCC's & two Bathursts" as an argument?

6. I think bkc meant coherent rather than cogent. To ne a cogent reply would entail it having a persuasive argument in one direction rather than the more balanced approach that was taken.

The trust T88 , 1050 hp muximum but nismo plenum 650 -700 hp air input nearly !!!! :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...