Jump to content
SAU Community

Recommended Posts

I have recently upgraded my skyline with full exhaust and electronic boost controller,

I am interested in more power though and am considering in a turbo of capable of higher pressure and FMIC.

There are turbos on ebay for around $300 and FMIC for around $300 aswell, Has anyone purchased 1 or I would like some opinions?

Link to comment
https://www.sau.com.au/forums/topic/165424-turbos-and-intercoolers-from-ebay/
Share on other sites

the cheap generic 600x300x76mm intercoolers are fine. Im sure LOTS of SAU'ers use them.

a $300 turbo on the other hand, not so great.

Yeah I have been reading on forums and seems that FMIC dont matter 2 much.

But what turbo then 2 buy I dont want 2 fork out 2 much any suggestions??

what motor is it? RB20 or RB25?

if your looking to do a turbo upgrade, there are more things to factor in than just a cooler upgrade.

the ecu would need to be modified or replaced, possible injector upgrade, a larger fuel pump, a stronger clutch, air filter upgrade etc etc.

i would rather buy a second hand brand name turbo then a brand new Ebay turbo.

$300 for the turbo, then 2 weeks later...$900 for rebuilding the turbo...OR possibly worse if the front wheel went into the engine...

can anyone point me in the way of buying a cooler my skyline, have only had it for around 3 weeks looking for somewhere to buy one, but a decent one

http://www.skylinesaustralia.com/forums/in...howtopic=138738

there are items on ebay, and there are items on ebay

some are completely dodgy items :

scams, electronic superchargers for 75HP which are a fan in the intake pipe on an n/a car

those 5HP resistors etc

600HP turbos for $600

not hks apexi nismo greddy tomei ashtray

dodgy traders

then there are good bargains well well know traders and shop "runners"

usually have really high feedback and sell good stuff just cheap

without the added bullcrap of running a normal retail store

choose carefully but remember there are lots of bargains

just be careful, double check, ask, lots of reading and check their feedback

I have RB25, I wouldnt mind 250rwkw, What are the capabilities of stock injectors?

I was told i should be able to get upto 15psi on stock injectors and ecu.

for that power you will need

- ECU - PowerFC, wolf, halteck, autronic (to remap fuel etc)

- New fuel pump - about a 500hp internal will be good

- Turbo, not an ebay turbo, a high flowed will be best as it will bolt straight back in so you won't need a new manifold or dump pipe and existing imtercooler

piping can also be used

- intercooler, hybrid are cheap and a decent brand

- injectors (recoomended)

with the injectors they should be able to to achieve that but you will need a new fuel pump and fuel pressure reg.

but keep in mind the duty cycle of the injector will be above 85%, so an injector upgrade will be good to lower the duty cycle.

550cc nismos are a direct replacement

Edited by 33_skyline

somebody should buy them and see how they go ?

there onli 300 bucks and they could onli blow not alot of money realli?

i mean hell most of the shit we pay for in the high labour costs, thats made in aust anyway

I have RB25, I wouldnt mind 250rwkw, What are the capabilities of stock injectors?

I was told i should be able to get upto 15psi on stock injectors and ecu.

hrms, not too sure if the stock ecu can handle 15psi...

anything over 12+ psi and your in rich and retard territory. though some sau'ers are lucky to get 14psi with no rich and retard on the stock ecu.

just my two cents...

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...