Jump to content
SAU Community

Recommended Posts

hey guys...

i need some help, i ordered some rims (19" Gold Volk GTC's, custom offsets) through JDMimports late last year. now payment was received and confirmd by charles on the 24th of November... (i have a copy of the receipt and tax invoice n such). charles has been very helpful through the whole process..up until now...

i was then contacted saying they have landed on the 22nd of march this year. i then let them know they are right to forward them to my address.

now...i still havnt gotten anything... i have tried emailing all 3-4 of there email accounts numerous times, i have tried there 2 mobile numbers constantly all throughout the day, and i got a fax number (no good to me).

what im asking is if someone is close to there area, can they go and see if the store/shop is still open.. or can someone give me a work phone number for them.

im 21..and started a mechanics apprentiship very late. so my wage is killing me... and $4000 is alot of money to me...(and most people)

There address is : 5 Saric Ave, Georges Hall NSW

if anyones in that area...please just drive past and see if they are still trading or if you got time go in and get me a phone number.

im getting quite worried, and this just gives me the attitude of "f*ck trading on the internet" even with "trusted" and well known traders.

do you guys think i should be getting worried because of the 4 weeks late, or more the not being able to contact them at all...

:):P

CJ

ps, im located close to brisbane, so theres no way a set of rims would take over 4 weeks to get to me...

pps, i have all relevant PM's and emails regarding this matter as proof, as i said...$4 grand is alot.

Edited by -_-StRyDeR-_-
Link to comment
https://www.sau.com.au/forums/topic/165787-help-needed-more-bad-tradings/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Sad to hear as I have bought 2 sets from Charles when he first started as a trader almost 2 years ago and was a great guy to deal with...I have heard on the grapevine that he has gone MIA again..shortly after their announcement that they are back in business few mths ago....this isn't the first time this has happened..probably no help to you but there must be a reasonable explanation...one being they might be in deep shit..but hopefully they will get back to you soon...keep us posted and GL.

yes guys, its JDMimports, NOT JDMconcept.

as i said, charles was very helpful, and kept my up to date constantly, telling me he received my money, then when volk receieved the order, estimated delivery time, when they had arrived... then then....vanish :)

i had seen the amount of people who delt with him and straight away thought "he's ligit".... hmm...as they say 'asumption is the mother of all f*ckups'

CJ

hey guys...

i need some help, i ordered some rims (19" Gold Volk GTC's, custom offsets) through JDMimports late last year. now payment was received and confirmd by charles on the 24th of November... (i have a copy of the receipt and tax invoice n such). charles has been very helpful through the whole process..up until now...

i was then contacted saying they have landed on the 22nd of march this year. i then let them know they are right to forward them to my address.

now...i still havnt gotten anything... i have tried emailing all 3-4 of there email accounts numerous times, i have tried there 2 mobile numbers constantly all throughout the day, and i got a fax number (no good to me).

what im asking is if someone is close to there area, can they go and see if the store/shop is still open.. or can someone give me a work phone number for them.

im 21..and started a mechanics apprentiship very late. so my wage is killing me... and $4000 is alot of money to me...(and most people)

There address is : 5 Saric Ave, Georges Hall NSW

if anyones in that area...please just drive past and see if they are still trading or if you got time go in and get me a phone number.

im getting quite worried, and this just gives me the attitude of "f*ck trading on the internet" even with "trusted" and well known traders.

do you guys think i should be getting worried because of the 4 weeks late, or more the not being able to contact them at all...

:) :)

CJ

ps, im located close to brisbane, so theres no way a set of rims would take over 4 weeks to get to me...

pps, i have all relevant PM's and emails regarding this matter as proof, as i said...$4 grand is alot.

Welcome to the club CJ !!

Charles & Steve Tison from JDM Imports have screwed heaps of people for thousands of $'s in the last 6 months on SAU & NS !! ( and I'm one of them ). You better get some legal help fast or kiss your $'s goodbye !!

With ALL SINCERITY & RESPECT !! SAU moderators, here's yet another example of why I'm asking you to ban JDM Imports and put them on the Bad Trader's List.

If you want to speak to those who've been screwed, I'll list all the logon names I know of.

Welcome to the club CJ !!

Charles & Steve Tison from JDM Imports have screwed heaps of people for thousands of $'s in the last 6 months on SAU & NS !! ( and I'm one of them ). You better get some legal help fast or kiss your $'s goodbye !!

With ALL SINCERITY & RESPECT !! SAU moderators, here's yet another example of why I'm asking you to ban JDM Imports and put them on the Bad Trader's List.

If you want to speak to those who've been screwed, I'll list all the logon names I know of.

...dont say that... cmon, im barly scraping $300 a week... legal help?? :)

CJ

Why dusn't someone just go to their house... or try to track them down in person? threatening to kill someone does wonders sometimes..

supposably they have another store elsewhere...and im not going to say anything that could come back at me...

CJ

guys iv recently been riped off by JDMimports, now i have also found a few others who have also been ripped...

please post up if you have or at least PM me the details, im collecting info on everyone that has had a bad deal with these guys.

this will be delt with!! (one way or another)

SAU, i think its about time you get some legal help/advice for when these issues arrise.

CJ

SAU isnt responsible for trading on the forum, it is at your own risk as also stated in the rules & guidelines.

but yeah ive heard so much about JDMimports esp on ns.com

jake33, issue is here: http://www.skylinesaustralia.com/forums/in...p;#entry3070026

i sent Prank and Blitz both PM's regarding the matter nearly a week before i posted these threads.. i know they are busy, but being admin/moderators i would have hoped they would have been online within a week and maybe replyd to me even just to say they will look into it and what i should do...

looks like il be losing my job in 2.5weeks anyway. so yah for me...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...