Jump to content
SAU Community

Recommended Posts

I was just wondering - what actually generally gets done when a car gets serviced, for your average 10 000km service?

At what points do you need more work done?

Is there anybody who's taught themselves how to service their car (ie somebody who didn't previously know too much about cars mechanically) to save a bit of money

Link to comment
https://www.sau.com.au/forums/topic/166582-car-service-what-exactly-is-done/
Share on other sites

best way to learn is to get someone to show you.

normal service is oil, oil filter, and air filter.

the machanic will tel you after he has done the service if anything else needs to be done.

yeh if you have a decent k&n filter etc no need for a air filter change, just oil, oil filter and i also change my spark plugs aswell, i do mine every 5000kms.

U change your spark plugs every 5000`s ?????? what for do u get problems with fouling they should last heap longer then that

Normal Copper plugs are meant to be changed every 20 thousands k's but for best performance there meant to be changed roughly every 7500k's thats why alot of people change copper plugs soo often

There was a whole topic about this somewhere on here

Mechanics will do more than just an oil+spark plug change - they look over the car for anything which is perished, loose, worn, broken, etc. They use their experience and qualifications (which i dont have), which is why i like to run my line past a mechanic every now and again to let them inspect it for something i cant see

Below is from the UAS website.

UAS General Service price is $220.00 (Skyline GTR $260.00)

and includes the following parts and labour:

*

Thorough check of your vehicle and report supplied, including:

*

*

Check all fluid levels

*

Check exhaust system

*

Check suspension system

* Check all drive belts

*

Check and adjust the idle and mixtures as required

*

Report on your brake level (% of worn brake pads given)

*

Check all tyre pressures

*

Check all lights

*

Washer jets adjusted if required

*

Washer bottle topped with cleaner fluid

*

Coolant condition checked

*

Engine oil "10w/40"and filter changed ( we use Motul 4100 synthetic type)

* OEM or Japanesee made oil filter - whichever is better

*

To clean and oil the performance air filter correctly (Extra $25)

*

Engine cleaned underneath

*

Clean and treat battery terminals, door hinges, bonnet and door latches

*

Road tes

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oops... I meant to include the connector  view... BR/W - power from fuse L/W - motor negative to fan control amp (and off to HVAC pin19) OR/B - PWM signal (from HVAC pin20) B --  ground  
    • Yep, if you are applying filler it sounds like there is something wrong with the body lol. Safe to assume there is going to be a lot of sanding going on if your still applying fillers.  Picture a perfect bare metal panel, smooth as glass. You lay down your primer, it's perfect. (why are you going to sand it?) You lay down the colour and clear, it's perfect. No sanding at all took place and you've got a perfectly finished panel.  You won't be chasing your tail, sounds like you were prepping to start laying filler. If your happy with the body after the sanding, there is some bare metal exposed and some areas with primer, no issues at all, start laying the filler. You are safe to lay filler on bare metal or primer (of course check your technical data sheet as usual for what your filler is happy to adhere to).  This isn't a 100% correct statement. There is primer that is happy to adhere to smooth bare metal. There are fillers that are happy to adhere to smooth bare metal. Just make sure you're using the right materials for the job.  Typically if you are using filler, you would go primer, colour and clear. I've never seen any instances before where someone has laid colour over body filler (maybe this happens, but I haven't seen it before). So your plan sounds pretty normal to me. 
    • I don't think there's any way someone is push starting this car.. I honestly can barely move it, and moving it and steering it is just flat out not possible. I'm sure it is, but needs a bigger man than me. I have a refurbished starter now. The starter man was quite clear and consise showing me how nothing inside a starter really should contribute to slow cranking, and turned out that for the most part... my starter was entirely fine. Still, some of the wear items were replaced and luckily it didn't show any signs of getting too hot, being unfit for use, etc. Which is 'good'. I also noticed the starter definitely sounded different, which is a bit odd considering nothing should have really changed there.... Removed and refit, and we'll pretend one of the manifold bolts didn't fully tighten up and is only "pretty" tight. GM only wants 18ft/lb anyway. I also found a way to properly get my analog wideband reading very slightly leaner than the serial wideband. There's Greg related reasons for this. The serial output is the absolute source of truth, but it is a total asshole to actually stay connected and needs a laptop. The analog input does not, and works with standalone datalogging. Previously the analog input read slightly richer, but if I am aiming at 12.7 I do not want one of the widebands to be saying 12.7 when the source of truth is 13.0. Now the source of truth will be 12.65 and the Analog Wideband will read 12.7. So when I tune to 12.7 it'll be ever so slightly safer. While messing with all of this and idling extensively I can confirm my car seems to restart better while hot now. I did add an old Skyline battery cable between the head and the body though, though now I really realise I should have chosen the frame. Maybe that's a future job. The internet would have you believe that this is caused by bad grounds. In finding out where my grounds actually were I found out the engine bay battery post actually goes to the engine, as well as a seperate one (from the post) to the body of the car. So now there's a third one making the Grounding Triangle which is now a thing. I also from extensive idling have this graph. Temperature (°C) Voltage (V) 85 1.59 80 1.74 75 1.94 70 2.1 65 2.33 60 2.56 55 2.78 50 2.98 45 3.23 40 3.51 35 3.75 30 4.00   Plotted it looks like this. Which is actually... pretty linear? I have not actually put the formula into HPTuners. I will have to re-engage brain and/or re-engage the people who wanted more data to magically do it for me. Tune should be good for the 30th!
    • There are guys on Facebook under, Infiniti Owners Australia   https://www.facebook.com/share/g/1Z3RbPqx4k/?mibextid=wwXIfr What Whp are you after and I can help, and join this Q group in the states. https://www.facebook.com/share/g/19A59cN3JR/?mibextid=wwXIfr
    • Does any of you guys have instagram pages for your builds? Keen to see some Aussie builds. I still can't figure out how to post photos in here.
×
×
  • Create New...