Jump to content
SAU Community

Recommended Posts

Sorry mate, just thinking about it.

My first price of $200 was way too high, $125 for the entire assemblies, at that price, not really willing to separate.

Hey Prophet. Did you get my PM regarding the E-brake cables?

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

Hey Prophet. Did you get my PM regarding the E-brake cables?

Sorry mate, must have missed it. Send me another one if you still need the gear.

Gearbox and tailshaft gone.

Wheels gone.

Brakes (hubs and calipers) gone.

Exhaust gone.

Instrument cluster gone.

Gearknob gone.

Still plenty of other stuff left guys and girls, make an offer on any part, all reasonable offers will be seriously considered, theres no point just having it laying around.

how much for your Front Right Hand Side headlight lookn from front on

and is it disclooured

pics plz

By front headlight, you mean drivers side headlight? Sorry you've confused me a bit.

Drivers side is in good condition, no discolouration, $175.

Passenger side is useless.

You may have missed my post???

Sorry yeah mate, I did miss it. Have you got a photo of it? I'm not quite sure what you're talking about, I may have it in my bucket of goodies laying around.

Have you still got the AFM and plug. If you have how much do you want of it posted to adelaide. If it's the three pin type i will only need the plug.

Thanks

Yeah mate I've still definitely got the AFM, I'll have to see if I can find the plug, alot of the loom got thrown with the car to scrap metal.

I'll get back to you when I get a chance to have a look.

hey also forgot to mention i need the rear brake rotors and pads if you still have them (at least need the rotors) will pick up tomorrow afternoon if you still hav them for the right price...

hey also forgot to mention i need the rear brake rotors and pads if you still have them (at least need the rotors) will pick up tomorrow afternoon if you still hav them for the right price...

Sorry mate, rotors and calipers for both front and rear have been sold.

I've managed to pull apart the engine completely to see what the problem has been for it to not turn over.

Turns out 2 rods are bent, top end is in good condition however.

Bottom end would suit anyone looking for a project building the engine from the ground up, the 2 damaged cylinders will not need to be rebored, just honed.

Considering all offers on either end, willing to separate if the price is right.

Edited by ProphetR33

hi mate, i just spoke to you on the phone regardaring the drivers side door for $150 to pick up on saturday. i forgot to ask you, does the switch and the motor work ok, or are they wrecked?

Cheers mate

hi mate, i just spoke to you on the phone regardaring the drivers side door for $150 to pick up on saturday. i forgot to ask you, does the switch and the motor work ok, or are they wrecked?

Cheers mate

The door was working fine before the crash, have since used the window without problems when it was on the car. Everything seemed to be working fine, it shouldn't give you any problems.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Its also worth mentioning that 30 years after it left the factory and god knows how many missed oil changes since, there is every possibility that one or more lifters are ticking because they are sticky/gummed up. To resolve that you need to pull the cams then pull each lifter, disassemble, clean, reassemble, soak in oil and re-install, and they should come up good as new.
    • What air filter are you running? Is it a panel filter in the stock air box, or a pod filter? Is the air filter the type that is oiled?   If you unplug the IACV, what rpm does the engine idle at?
    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
×
×
  • Create New...