Jump to content
SAU Community

Recommended Posts

Hello guys,

Having a really big problem with my ride (R34 GT) and I dont know whats wrong. :pwned:

Everytime i step on it before it reaches 3000rpm its sounds like a WRX(brbrbrbrbr..) and car shakes a bit and very poor acceleration no go at all. sometimes when its on first gear its alright sometimes not but mostly when it comes to 2nd to 3rd its really bad. by the way my car is Auto tiptronic.

can anyone help me and tell me what the problem is?

at least i might have an idea when i go to the repair shop so they wont rip me off.

Can someone recommend me a good mechanic to have a look at my car and knows about skylines.

Oh btw Im in Brisbane

Thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/167535-my-r34-needs-help/
Share on other sites

could be a few things, but i've had this happened to me before. check your spark plugs, timing belt, intercooler pumping, transmission and even check your battery. it's hard to say, but obviously something is limiting its power and not allowing it to reach its potential. no a serious thing i don't think, but get it checked out by a mechanic that knows about sports cars not any mechanic as they will rip you off and the reality is, sometimes they might not even know what to do.

good luck mate.

here you go

http://www.skylinesaustralia.com/forums/in...ic=103835&h

its all explained here, it happened to my car and a few peoples cars on the forums

its the coilpacks yeah go nengun (if your willing to wait)

Thank you for all the input guys! helps a lot!

please check ur spark plugs before going out and spending $600 on coil packs. it could be one dodgy plug. pull them out, clean them and check the gap using filler gauges (or is it feeler gauges???) if not plugs check conection on coils and also clean coil contacts (remove plug end and clean right down) remember electricity is like water it flow to easiest route first, so if bad contacts on coil.....u know whats going to happen.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 12+ months passed so they have no obligation to do a warranty claim. It leaked from the rear circuit. Front circuit was fine, but I tried many times to bench-bleed and in-car bleed (wasted 1L of Penrite racing brake fluid) to no avail. Threw my old BM50 or whatever the standard R32 GT-R BMC is, brakes went back to normal. So from my very limited anecdotal experience, I cannot recommend HFM, even though a lot of their products looks good. Just my experience (I have a genuine Nissan BM57 in a box waiting to be installed now).
    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
×
×
  • Create New...