Jump to content
SAU Community

Recommended Posts

so for a while, ive had this wierd grinding that has come on and off here with a strong humming. lately it has got worse and worse, so eventually i popped the boot and listened to it on idle and as i thought it was coming from the pick up where the fuel pump is.

now i had just recently replaced a f**ked stock one with a bosch 040, even had it installed by boostworx whos a very reputable shop in SA, so its left me puzzled as i have bever heard of one of these failing before. now ive gotta go have a look for the warranty papers :)

Link to comment
https://www.sau.com.au/forums/topic/167602-a-bosch-040-failure/
Share on other sites

Hey Stew,

Are you able to describe your setup? Is the 040 where the stocky was? Same pick up height?, sock filter?

Mate of mine had a few let go in his 180 recently. He had heaps of crap in his tank tho lol, might be worth a look.

I'm thinking of late, this is how many die, and how they are getting such a bad rap :D

no. there just shit. lol ive turned blu in the face telling people they just dont work.....

cold ok. hot gay.

Im not sure what hot gays have to do with it, but as long as industry continues to use em, so well I :D

Hey Stew,

Are you able to describe your setup? Is the 040 where the stocky was? Same pick up height?, sock filter?

to be honest i do not know as boostworx put it in. i can pull it out and have a look if need be. boostworx are a reputable workshop, and it seems to pick up as much as the stock one, if not a bit more.

Im not sure what hot gays have to do with it, but as long as industry continues to use em, so well I :D

lol.

yeah i replace them for the fun of it do i???? ever put a fuel pressure guage on one from cold to hot and see the pressure drop down to 10 pound when the fuel heats up? if not your driving a time bomb.

but its ok. you simply turn it off and re-start. and wait for it to start cavitating again.

it was kind of a piss take after how many people always reccomended them saying theyd never had one fail etc.

the pumps themselves dont fail. the way they are mounted is important. if they recieve any sort of air bubble then they cavitate and loose pressure. they still work but they dont operate in fuel over about 30degrees

besides they only put out 10% more than a gtr pump.

To start with, if you didn't have the tank removed and cleaned...and can show proof, then no warranty will be had. Also...who said the pump has failed. Just because it makes a bit of a noise. I have used a fair few of these before without failure on a single one. Doesn't mean it can't happen but it's highly unlikely. The noises can quite possibly be coming from the standard mounting frame which the pump will vibrate against if it has no padding between itself and the pump. Also if they are mounted too low they can vibrate against the bottom of the tank.

Noise doesn't mean stuffed.

yeah. like they dont fail there output just drops off as the fuel heats up. happent to me and 3 of our customers. they pumps them selve ae fine. they just went operating properly.

kinda hard to explain with out a 10 min long video showing exacly what gos on.

th o44 is a gem. no dramas regardless of mounting style

(lol @ spelling,dialing wand needed)

to be honest i do not know as boostworx put it in. i can pull it out and have a look if need be. boostworx are a reputable workshop, and it seems to pick up as much as the stock one, if not a bit more.

Shaun measures the length and sets them up correctly. So yes.. Exactly the same height as stock.

Bosch pumps do get groany when the fuel heats up. When mine wasn't receiving full volts it was so bad the floor pan would vibrate and could be heard/felt over the radio.

To start with, if you didn't have the tank removed and cleaned...and can show proof, then no warranty will be had. Also...who said the pump has failed. Just because it makes a bit of a noise. I have used a fair few of these before without failure on a single one. Doesn't mean it can't happen but it's highly unlikely. The noises can quite possibly be coming from the standard mounting frame which the pump will vibrate against if it has no padding between itself and the pump. Also if they are mounted too low they can vibrate against the bottom of the tank.

Noise doesn't mean stuffed.

yeh, i read the warranty, bit annoying.

i used a question mark in the title because i was asking a question, i wasnt stating it had failed. it still seems to be working, although i have noticed some stuttering, but in saying that i have fitted an RB25 turbo recently.

its been a deteriorating issue, it has been getting worse over time, now considering i have driven in 43' heat and not had this problem, but now driving in 20' heat and having it worse than ever doesnt seem to make sense. the noise happens here and there, not every time i drive it. happens when its cold (just reached or a bit below operating temp), hot, doesnt matter.

the humming is one thing, but the loud scraping noise is a bit of a worry.

ill take it to shaun and see what he thinks, if its just the noise, im not fussed, but when i hear something like that, i want to make sure im not going to have to be picking up pieces of my engine any time soon.

went to turn on my car today, turned the ignition on, but didnt hear any fuel pump buzz like usual. so went to crank it over, started terrible like usual, did it again and gave it a bit of throttle and it made it. turned it off, tried it again, no fuel pump buzz, cranked it over again, started just as bad again (which is unusual), kept repeating this and never heard the fuel pump buzz, not sure whats happening. the noise wasnt very prominant, but like i said, it happens here and there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...