Jump to content
SAU Community

High flowing the stock turbo


Recommended Posts

Guest MFX_R33

Hey Pete,

I got my interior trimmed by To The Max here in Sydney. For what I got done I think it would cost about $1500 -$2000. I got the two seats trimmed, they are Integra seats (the bench sucked), the 2 door trims, and a custom centre console I made with a 10" sub between the seats (about shoulder level). This is not in the pic.

After I got the leather, I got the colour matched in a Vynil paint and I just pulled out the dash and sprayed it.

Jeff.

hmmm.. I have recaro's in my surf with black on the outside and silver in the middle, so I am thinking getting the black done in leather / vinyl (in black) and not sure what colour for the dash.

Its currently just like yours used to be. Do you have any close up photos cos it looks sweet in the photo on your site but i have been told that painting dash's looks cheap close up..?!?

Guest MFX_R33

Depends on how you paint your dash and what paint you use. i dont have any close up pics but it looks like the standard one just tan, and a little shinier. I have painted mine with a gloss clear but if you don't like that look you can paint it with a matt clear. It looks fine and the paint sticks raelly well, I even did the standard steering wheel and it sticks perfectly to that (with the constant use) as well.

Jeff.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
    • Well, I had an Edward Lee's special edition odo windback car/motor with a RB25DET S2 and I put down 372kW with a good amount of track abuse for 1.5 years before the ring lands decided it didn't want to stick around anymore 🥲 But probably didn't help I kept on smashing try limiter on the track and a few skid pans.
    • That is correct,  I have a forged RB25/30det NEO hiding away safely and I wanted to use the very rare greddy vct adj cam gear on this new setup and so I just used the whole thing on my s1 instead of pulling it appear because I'm lazy af 😅🤌🏼
×
×
  • Create New...