Jump to content
SAU Community

Recommended Posts

im having a bit of difficulties trying to pick which turbos to upgrade to

(yes ive read/searched the forum)

BUT i'm just wondering which turbos YOU would personally go for if it was your car

supporting mods for the R34 GTR (street use)

(currently making 269rwkw on stock turbos)

HKS turbo back (split dumps, front and catback, deCAT)

HKS adj cam gears

HKS 600cc injectors

Tomei poncams 264/264

Pfc

Pfc boost control

Bosch 044

Apexi intake pods (stock AFM)

Nismo twin plate clutch

*edit* Nismo AFMs to be added

If im aiming around 330-350kw atw, do i need any other supplementary mods?

Any advices/feedbacks (no flames) are appreciated

Help out a newbie

Cheers,

:blink: good to see the forums back online

Edited by andz69
Link to comment
https://www.sau.com.au/forums/topic/167907-hks-2530-or-hks-gt-rs/
Share on other sites

  • Replies 78
  • Created
  • Last Reply

Top Posters In This Topic

I would go GT-RS because they are just awesome like your current mod's list going into a turbo upgrade.

Although it is a common Stage 2 addition to get twin Hks 2530's. Can anyone with a GTR with these turbos please comment?

Edited by Pauly33GTS-t

- AFMs will be maxed out before you go past 315kw.

- It is not guaranteed but it is possible that your coils will fail immediately or after running a short time over 300kw

So in my opinion add splitfires and Nismo AFMs to your list.

Alternatively you can go Z32+Adapters AFMs but you'll need to set the intake piping up to suit the larger diameter AFM bodies.

As for the turbos - GT-RS's all the way.

To be honest though on a stock bottom end I would chose GT-SS's and save for a forged rebuild before going to the GT-RS's. Then you can go nuts with what you already have and sell the SS's. That's just me though I prefer to be ultra conservative.

Yeah, he will need bigger AFM's, You are looking at around 500 for 2 Z32 AFMs Andy, then 3,700 for the turbo's (GT-RS) then a tune from Shaun (~400) then you may need a rebuild with forged internals... Stage 2 for you...

If you get GT-RS you'll hate them on a 2.6L engine. It will be lag city. I bet you'd change them not long afterwards.

You should either be considering GT-SS (more response - less power) or the 2530's (more power - less response)

forgot about AFMs

i have apexi pods (76mm), so changing to the Z32 pairs..id need to change my apexi intake pods

im quite aware of the "lag city" in the RS, but i like the power they deliver

wondering wat rpm do they come on? 5000?

what about fmic? will i be ok with stock ones? i think theyre 600x300 x60-70?

Edited by andz69
forgot about AFMs

i have apexi pods (76mm), so changing to the Z32 pairs..id need to change my apexi intake pods

im quite aware of the "lag city" in the RS, but i like the power they deliver

wondering wat rpm do they come on? 5000?

what about fmic? will i be ok with stock ones? i think theyre 600x300 x60-70?

You've got a twin pod set up then?

2530s are still available new from HKS.

I would go the 2530s or even SS.

as for AFMs, nismo AFMs will fit to your current Apexi intake kit.

as for what RPM RS come on, search through Blitz's posts, he is running RS on a 2.6litre RB26 and posted a graph recently.

2530s are still available new from HKS.

I would go the 2530s or even SS.

as for AFMs, nismo AFMs will fit to your current Apexi intake kit.

as for what RPM RS come on, search through Blitz's posts, he is running RS on a 2.6litre RB26 and posted a graph recently.

i did have a look at the SS, but they're not much of an upgrade from the stock turbos, thats why i tend to lean towards the 2530s and the RS'

Umm nismo AFMs?...arent these 80mm?

my pods are for standard 76mm AFMs, do they come with adaptors?, nice to hear, i'll have a look at them.

Thanks beer

i did have a look at the SS, but they're not much of an upgrade from the stock turbos, thats why i tend to lean towards the 2530s and the RS'

Umm nismo AFMs?...arent these 80mm?

my pods are for standard 76mm AFMs, do they come with adaptors?, nice to hear, i'll have a look at them.

Thanks beer

We changed from 2530's to GT-RS turbo's and made only 15kw more and had to rev the thing 1000rpm harder

the turbo's and a retune were the only thing that changed.

the GT-RS turbo's require a lot of other changes (capacity, headwork etc) to get them to perform

you must remember they are the airflow equivalent of a HKS T51R KAI (well almost)

If you get GT-RS you'll hate them on a 2.6L engine. It will be lag city. I bet you'd change them not long afterwards.

You should either be considering GT-SS (more response - less power) or the 2530's (more power - less response)

This seems to be a common myth

I switched from GT-SS's on a 2.6 to GT-RS's and im very happy with them.

IMHO with a tuner that knows how to set them up for street, they can be a very good package - Sure they are larger and therefore lagier than GT-SS's, but CRD did a great job optimizing my car for street performance with my existing 260 degree poncams and the GT-RS's on a built 2.6 bottom end.

Nismo AFM's are stock size, and similar voltage curve to Z32. I have a pair, and a stockers airbox. They'll fit fine

learned something new

We changed from 2530's to GT-RS turbo's and made only 15kw more and had to rev the thing 1000rpm harder

the turbo's and a retune were the only thing that changed.

the GT-RS turbo's require a lot of other changes (capacity, headwork etc) to get them to perform

you must remember they are the airflow equivalent of a HKS T51R KAI (well almost)

a very constructive reply, thanks

i'll keep a note of that, 2530s are popular in the 'RB26 forced induction' for a reason

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...