Jump to content
SAU Community

Recommended Posts

Hey I've got a series 2 r33.

It's pretty much stock except for splitfire coilpacks and a heavy duty clutch.

I'm getting a turbo back highflow exhaust in the next week or two and am going to get a turbosmart boost controller at the same time and up it to 10psi.

The issue:

For these mods, is it worth getting a justjap cooler for a few hundred more than an r34 smic, or is an r34 smic all that is needed?

Can more boost be run (say 12psi) be run safely through an r34 smic as compared to the r33 smic?

With 12psi is in unrealistic to aim for a mid 14??

Also, does wrapping the dump and front pipe of the exhaust in heat wrap make much of a difference? Is it worth doing?

Thanks to whoever helps me out.

Steve.

I got full exhaust- 14.0 secs flat..

other mods: pod filter.. thats not really a performance mod.. n thats basically it.. 14 flat.. With 18inch rims front, 17inch rears.. lol

Anyways, the 34 cooler will be enough for around 200-210kw..

I wouldnt go past 0.8 bar, till you get your car tuned!!

if you are on a tight budget, add an SAFC in there and get it tuned.

SAFC with the blue screen is worth about $300 or so. Tune is about $150.

install it yourself..

it only has like 6 wires.

comes with instructions.

and you can search and find the ECU pin out diagram for your car on here somewhere..

that way, with your r34 cooler, exhaust, and extra boost, you can have the fueling tuned to make sure it's safe and also gain more power at the same time..

yes.

heat wrap the dump and front pipe if you can.

yes, you can run a 14..

aim higher..

all the above mods should net you about 190rwkw..

that should be good enough for a 13 of some sort.... with a bit of launch practice..

I had a 34 cooler on my 33. Great upgrade really. And easy to do. I fitted mine in the pouring rain without removing anything but the inner plastic guard in no time. Nissan did us all a favor when they designed the R34's cooler.

Wrap the dump eh? I was going to ask this when I changed mine.... anyway, R34SMIC works well for me. I started on 7psi with the manual ball and spring controller, then 9, now 10psi (as I get bored with the power) Seems to be fine, and power doesn't drop off as though there is massive heat-soak or anything.

I'm yet to hook up a temp probe to check this all out though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...