Jump to content
SAU Community

Recommended Posts

Start 9/5/2007, End 20/6/2007

Product : Apexi PowerFC for RB25

Price : $1550 (incl. delivery see below)

Supplier : JPSHK (Car Product Wearhouse in HK)

Delivery Cost :$25 * incl. in price

Notes : Excess Stock from HK : 10 units for sale (only 10 confirmed in stock and on hold)

-------

This supplier of my PFC which was operated fine now for over 1 years.

PM me for any further details.

1.

2.

3.

4.

5.

Link to comment
https://www.sau.com.au/forums/topic/168015-powerfc-gb-for-rb25-33-gtst/
Share on other sites

Your buying these from JPS trading? Have you confirmed he ACTUALLY has them as he has a reputation for advertising stock on ebay that he doesn't have.

Its not from ebay and its not form those people. My supplier has supplied parts worldwide some time now.

There are units left O/S I have seen them personally. As we bought in a few and sold to other people outside this GB. I just thought I would offer this up to SAU members - no real skin off my nose as these will be sold outside of SAU regardless.

if theis is not about my GB then either PM me or dont post.

cheers.

Im also guessing 1 year warranty?

There is no warranty as they do not make these items anymore mate and no1 supports them.

If it doesnt work form the box it can be replaced (if any are left) or refunded.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Ha, I've never pressed the X in all these years incase it removed the notification for all Admins
    • I don't know, I've never done it that way, but 1. While it is an interference engine, there is still clearance between the valves and the piston at all points in the regular timing cycle 2. There is not a lot of distance before you can't catch the top of the valve stem any more I don't know if 2 is greater or less than 1. But 3. If it doesn't work out you are f**ked, engine is coming out to disassemble so it is a big bet.
    • Semi slicks are horrible for road use, just use a high performance road tyre unless you really need the maximum grip. Noisy, unpredictable (amazing, until they are not), expensive due to very high wear and not good in cold and particular wet. And yes, it is a thing to store cars on stands instead of tyres if you know they are going to be parked up long term.....but who ever realises that a short park is going to stretch into years before it is out again!
    • I know in Australia you'll definitely get above 30c. Parked in the shade in Summer you'll be above that. 😛 But in cooler climates, you might get that warm driving on the highway for a bit, but you'd never get to full heat temp. I'll try and find some of my historical tyre temps between Aus summer and winter (be aware immin the warmer area of Aus too.)
    • I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
×
×
  • Create New...