Jump to content
SAU Community

Apexi Power Fc R33 Gtst

Young Gun
 Share

Recommended Posts

Young Gun Enthusiast

Young Gun

Posted
Posted

Hey guys

i realise the power fc's stoped production for r33 gtst but i know you can still get some if you shop around. What would you expect to pay for them now and is it worth the mark up?

I searched the forums but didnt find what i was after. i heard that once you start tunning for big power the power fc is not the best ECU for the job because you cant adjust boost levels or something to specific measurements (hope this makes sense) is this true? cos ive been saving up for a haltec e11 ($2150) but if i can get a power fc cheaper ill consider it. (im chasing a street tune of around 270rwkw max)

Link to comment
https://www.sau.com.au/forums/topic/168059-apexi-power-fc-r33-gtst/
Share on other sites
Pauly33GTS-t Veteran

Pauly33GTS-t

Posted
Posted

Sorry but, search.

It's not that hard and you will find your answers quicker than waiting for replies in many cases.

I'd pay around 1,200-1,600 depending on condition of the unit and it must come with the hand controller and even that's overpriced fairly stupidly.

Expect to pay that much for discontinued stuff that is still useable.

Guilt-Toy Grand Master

Guilt-Toy

Posted
Posted

Click on the link in my SIG about getting power FC's. they are still available and Apexi are still making them BUT they are only available through Apexi.

Click the link below and get yourself one before the demand stops and they stop making them.

Young Gun Enthusiast

Young Gun

Posted
  • Author
Posted
If you still need help here is the link and read the second post of the thread all the info you need is there.

http://www.skylinesaustralia.com/forums/in...howtopic=167846

Thanks heaps for that. I think i might go with that place from your sig.

  • 2 months later...
Birnie Veteran

Birnie

Posted
Posted

There used to be one in the For Sale section without the hand controller for $900 i think,

THat would be a good option if the condition is ok.

I'd go without the hand controller and cough up the $500-ish for the Datalogit instead.

If the car is tuned well, the hand controller doesn't really serve much purpose but it is nice to look at i guess.

Young Gun Enthusiast

Young Gun

Posted
  • Author
Posted

i think i might go for a haltec instead as i would need to buy a better AFM with the power FC so i would be looking at around $1950 all up. I can get a good deal on a new Haltec for $2000 running MAf (or MAF less the one that i dont need an air flow meter)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...