Jump to content
SAU Community

Recommended Posts

:D Hey guys, since buying the R32 gts-t about a month now i seem to be encountering a few problems.

#1 seem to crank the car more than once to get it to turn over,if i crank it once and give it a lil foot on the

gas it will start fine. If i don't give it a foot it will shake and jerk then stalk without the engine even starting

up yet. When i hear the sound & running of the fan thats what im refering to when i say engine not starting up

yet.

#2 The car seem to run good every so often,but when it stalls on you like this it gives u the shits.It will stall at

red lights, stalls while the turbo timer is running even stalks sometimes when im driving. Most of the times i

feel it in my gear down shifting,gears doesn't feel like its been down shifted and when i come to a stop then

looking at my rpm its reading way over the 1000rpm mark, then splat the car stalls. The revs will go pass

1000rpm then drop down and stalk. Down shifting gears is suppose to feel like the car is slowing down and

u can hear the engine doing that, When the revs is high and im down shifting i don't hear that, come to idle

at red light if revs over 1000rpm it will drop then stall.

#3 Why is my car jerking alot now . The car seem to jerk alot when i give it. I ease off the gas and try again it will

jerk. Jerk violently sometimes. The other night i wanted to give it so i down shift to 4th the car didn't go

nowhere,the revs didn't move.So i couldnt even down shift to see how the car would go.Felt like

some kind of blockage. Could it be something to do with the sparkies i just put in. I've read about how you

suppose to regap them,but not to sure if it is the sparkies.

Yeh sorry guys for blabing on,i apologies but i do need some help . If anyone could help out that would be

great.thankz guys

Link to comment
https://www.sau.com.au/forums/topic/168242-problems-with-my-r32/
Share on other sites

#1 is a common problem. A lot of R32 owners have the same cold start problem (including my self)

Clean your aac valve to see if this fixes your idling rpm.

Also do you have a blow-off value? Have heard this causes issues on idling too.

yeh thankz guys for all your advices and help. Going to borrow a mates afm and see how she goes from there.I've yet check the acc valve but will check that out also. I'll keep you guys posted on the progress. Much appreciated guys

  • 2 weeks later...
  • 6 months later...

1 - it seems that most 32's have the same cold start issue. mine included, you learn to live with it after a while. cleaning the aac valve and iac valve helps

2 - like others have said it's probably the afm dying. if you have an atmo bov that could be causing the problem too. get a std bov and see if that fixes it

3 - could be your afm again, could be your coilpacks. is it misfiring (exhaust making popcorn noises)? whats your spark plug gap? it could be an air leak. Check your intercooler and turbo piping for any leaks, make sure the hose clamps are tight and the pipes/hoses firmly seated.

My car used to jerk + misfire etc on boost but drove around fine off boost, turned out to be the tiniest air leak from a slightly loose hose clamp that grew on boost but sealed off boost.

the revving over 1000rpm then stalling could be because the motor is opening the aac valve and raising the revs trying to compensate for air being lost somewhere but cant get enough so it stalls.

When its jerking is there alot of black smoke coming out of the exhaust?

the engine manual says idle should be set at 650rpm, but mines at around 800-900rpm.

apart from using more petrol at idle i dont see there being any problem with that

Edited by r32woohoo
1 - it seems that most 32's have the same cold start issue. mine included, you learn to live with it after a while. cleaning the aac valve and iac valve helps

2 - like others have said it's probably the afm dying. if you have an atmo bov that could be causing the problem too. get a std bov and see if that fixes it

3 - could be your afm again, could be your coilpacks. is it misfiring (exhaust making popcorn noises)? whats your spark plug gap? it could be an air leak. Check your intercooler and turbo piping for any leaks, make sure the hose clamps are tight and the pipes/hoses firmly seated.

My car used to jerk + misfire etc on boost but drove around fine off boost, turned out to be the tiniest air leak from a slightly loose hose clamp that grew on boost but sealed off boost.

the revving over 1000rpm then stalling could be because the motor is opening the aac valve and raising the revs trying to compensate for air being lost somewhere but cant get enough so it stalls.

When its jerking is there alot of black smoke coming out of the exhaust?

the engine manual says idle should be set at 650rpm, but mines at around 800-900rpm.

apart from using more petrol at idle i dont see there being any problem with that

Yeah I think the jerking is some sort of boost issue. What boost is running? Also it could be a leak of one of the hoses etc as R32woohoo said or it could be a blocked wastegate etc.

Bottom line: that jerk indicates that the ECU is cutting boost in what it believes to be an emergency situation where the boost is climbing too rapidly for what the stock ECU thinks is installed in the car and is likely to blow a head gasket if it continues.

And if you're not overboosting then I think the ECU thinks you are/there is a flow problem that could be potentially major if it wasn;t cut off. Don't drive around with it continuing to do that, cutting off boost so immediately that the entire vehicle jerks violently CANNOT be good for your cars internals (just better than the alternative to the ECU).

Theres no such thing as boost cut. the ecu has no control over boost whatsoever.

If its an air leak it jerks because the air that was supposed to go into the cylinder for combustion has leaked out and the fuel cant ignite.

ie: the injectors are squirting but theres no air to burn it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...