Jump to content
SAU Community

Oil In Intercool Pipe

Zas)-(

By Zas)-(,
in Engines & Forced Induction

 Share

Recommended Posts

The Mafia Grand Master

The Mafia

Posted
Posted
hi guys i was just changing my old adapters to new ones

n i foun that theres black oil stuff in my intercooler piping... looks

realli black and old

why is it there?

should i be worried?

should i crucify myself?

why is it there? - Its there because who ever sold you the car must have forgotten to put one of the pistons back in.

should i be worried? - Yes, probably only running on 5 cylinders

should i crucify myself? - Yes, on a cross, with barbed wire, and lots of monkeys dancing around you with whips

On a more serious note, this is normal.

PM-R33 Grand Master

PM-R33

Posted
Posted

Oil in the intercooler piping is just usually from oil blow-by due to emissions, if u have a look at ur cam covers ull notice hoses running from them into ur plenum and into your intake pipe, this is how the oil gets into your piping. If you wanna stop this you need to run an oil catch can :stupid:

Phil

PM-R33 Grand Master

PM-R33

Posted
Posted (edited)

Hahaha yeah oil is a bitch, as for what type of oil catch can, best thing is to do a search as its been covered a lot of times, but to give u a basic idea, you either can set up an oil catch can a legel way or an illegal way. Legel way being is u set it in line with your standard lines and have the catch can catching as much oil as possible before it plumbs back into your intake pipe. The illegal way is you get rid of it plumbing into your intake pipe all together and just run a filter on the catch can.

Have a search and theres heaps of pics showing how to set them up and which ones are better than others, i run a drift oil catch can because you can open it up to fill it with steel wool and u can also run a filter onto it, but the choice is urs :stupid:

Hope that helps a bit

Phil

Edited by PM-R33
Dush Mentor

Dush

Posted
Posted

mmm.. I've got the sme problem... but i think that their is too much oil to be normal.. I been told it could be the oil seals on my turbo or i might of done some ring damage on one of the pistons...?

what do u guys think?

Zas)-( Community Regular

Zas)-(

Posted
  • Author
Posted

i always thought if u had any type of oil in your blow off your turbos worn out or on the verge of shitting itself..

and too much oil? i had a thin layer layer of black oil ..

yeah tru topics are covered..

ahh i see thats a great idea with the steel wool.. im gonna steal dat idea.

i'll look into more catch cans...

cheers guys

fEkuaR Experienced

fEkuaR

Posted
Posted
mmm.. I've got the sme problem... but i think that their is too much oil to be normal.. I been told it could be the oil seals on my turbo or i might of done some ring damage on one of the pistons...?

what do u guys think?

If there is alot of oil then its possible its a turbo seal or a ring cause alot of blow by. Do a compression test on the donk if tha checks out then id look at getting your turbo rebuilt.

tridentt150v Grand Master

tridentt150v

Posted
Posted

Steel wool. don't use it. Go to woolies or Coles and buy a stainless steel scourer for about $1.50. Its like a 1-2mm wide continuous band of stainless steel in a ball. Unlike steel wool, its clean, there is no dust, it won't rust, and it will condense the oil vapour. One scourer is all you need.

Pull it out and fluff it up , it will take up the space in the catch can.

Zas)-( Community Regular

Zas)-(

Posted
  • Author
Posted

nice.... so this will generally keep you oiler much more cleaner and smoother to run..

... haing a catch can should really be a basic mod i never knew it had so many advantages. if it makes my oil cleaner and saves me cleaning oil off my hands( to which i still hae including the cuts and the smell ) .... then hell yeah!

:nyaanyaa:

mite take up the cusco brand oil catch cans..

what other brands can have the heads taken off for me to put the scourer in ?

PM-R33 Grand Master

PM-R33

Posted
Posted

well if u dont have anything in the catch can and its just hollow, the air will just pass through it and the oil probably wont be caught in the catch can and therefore defying the point of it, however if u have something inside like steel wool or whatever, the vapor hits the wool and seperates the oil which then falls to the bottom, kind of like condensation.

Hope that helps a bit.

tridentt150v Grand Master

tridentt150v

Posted
Posted

OCC's are for partially removing the oil vapour from your rocker breathers.

What happens is:

Your motor has to vent. The combustion chamber vents via the inlet and the exhaust. The sump vents via the rocker boxes. The pressure of pistons whirring around creates suction and pressure in the sump, this is when your looking at the underside of the piston. So when it travels up the bore a piston creates suction in the sump, and when the combustion pushes the piston back down the bore there is air displaced that creates pressure. There can also be some blowby, this is air that escapes out the combustion chamber past the rings, that is, the rings are unable to contain the 'explosion' of petrol burning. This happens in worn motors mainly and can increase when your reving the bejesus out of it.

This negative and positive pressure created in the motor on the underside of the pistons breathes up through the oil galleries into the rocker boxes. The rocker boxes in the old days used to breathe out a mini filter to atmosphere. In this pollution conscious age, the breathing is vented back to the inlet side of the motor and burnt.

In the case of a turbo skyline the oil vapour in the rockers is vented back to the intake pipe in front of the turbo.

The turbo picks up this oil vapour air as well as normal air through the air filter, compresses it and sends it through the intercooler piping. The act of compressing the air [which is a turbo's job] and also hitting the cooler intercooler piping helps condense the oil vapour, so it settles in your piping. Thats how the oil gets in your intercooler etc.

A way of slowing this buildup down is to install an oil catch can. You install the can in series on the line that comes out of your rocker boxes [also called a tappet cover etc]. So you have the oil vapour air coming out of the rockers, into the catch can via one fitting, passing through the steel wool, and then exiting via the other fitting and then entering the intake pipe on the turbo. The catch can and steel wool are supposed to make the oil vapour condense and separate from the air. This happens, BUT a catch can only helps, it doesn't stop or trap all vapour, so you will still get some vapour getting to the intercooler piping. The older and more worn out your engine is, the more oil vapour that gets pushed through.

And thats my short answer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
×
×
  • Create New...