Jump to content
SAU Community

Recommended Posts

well i've had this problem for a while but last night i went for a big drive through the hills and it started to get worse. Basically after a fairly long drive i come up to a 't' intersection and i'm slowing down, when i put the clutch in it keeps stalling, it happened about 10 times.

I've done my cam gears recently but i've set them to zero for my tuner to change so they should just be like stock at the moment?

Any ideas on what it could be would be much appreciated!

Link to comment
https://www.sau.com.au/forums/topic/168465-stalling-when-coming-to-a-stop/
Share on other sites

"my car is doing this thing were it makes a huge wooshing sound, then blows flames from the exhaust, then the bonnet blows off, and mysteriously re-generates back on the car, are you able to tell me why?"

"what mods!!" x 100000 posts

"oh sorry, forgot to say that its a mk639 UFO with light speed hyper drive"

TO EVERYONE WANTING TO POST A PROBLEM - LIST YOUR MODS, WE CAN'T READ YOUR MIND AND KNOW WHAT YOUR CAR HAS GOT

Edited by The Mafia

id say afm, when shaun tuned mine we had to lengthen the intake pipe to stop the turbulance stuffing up the afm signal. lookout mafia learnt how to use caps lock and big font in the one go, must be feeling really smart today.

This is going to sound stupid.. bear with me.

I had the same problem, changed the AFM, cleaned AAC valve, reset ECU, checked plugs etc etc nothing worked.

Turns out there was a loose connection with the battery ie not fixed on properly, tightened that and had no more problems. So try that.

i had this prob. and took my car to mercury motorsport and they changes my o2 sensor got the right plugs and checked my timing and now its running wicked good.

i got pod, 600 x 300 x 75 FMIC, cat back zorst, tried cleaning my AFM and it did nothing,

get a good tuner to check it out.

AIF

sorry guys, was in a rush when i posted this. mods are as follows:

rb30det in an R32 (stock rebuild with r32 rb25de head, 5000kms old)

power fc

adj. cam gears set to zero

NO BOV

z32 afm

straight thru 3" exhaust with 1 muffler

xr6 iwg turbo

1000km old o2 sensor

GTR fuel pump

GTR injectors

Also car is making 228rwkws @ 15psi (think this is a little low for the mods i have but anyway)

Hope this helps things, cheers!

My best guess would be that your idle air controller is blocked up with crap. Have a look in the diy/faq section, there is a tutorial on how to clean them out.

Cheers

Josh

will give this a go! Cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
    • There is a warning that "this thread is super old" but they ignore that anyway...
    • With 10% Ethanol, we're talking 2-3% fuel consumption difference. The emissions reductions and octane boost in my opinion far outweigh this almost non existent loss.    My tanks sitting at 80%. Luckily that should go down fast as I'm on vacation again for the next two weeks. 
×
×
  • Create New...