Jump to content
SAU Community

Recommended Posts

hey all,

In this time i crazy about suspension between Tein Super Street amd G4 racing..

I know tein is good suspension. but i dont have any idea about g4 racing.

anybody use the g4? and please recommand other compnay as well..

thanks,

Lance

Link to comment
https://www.sau.com.au/forums/topic/168681-recommand-suspension/
Share on other sites

Mate, 1 piece of advice I'll give you is whatever suspension you choose make sure it's not too hard. A lot of people race out and buy the hardest coil overs and the biggest wheels they can fit and the problem with this is it just plain makes the car dangerous. The back wheels have no give and simply break traction and axle tramp under the pump. They also don't absorb any of the cars inertia during cornering and can cause the car to unsettle over bumps during cornering. Last of course is the ride WILL drive you nuts, far too hard! I've fallen into this trap and will never buy HARD suspension again unless the car was going to be purely a track car. Hope that helps.

I have the SK group but stuff in my car and the only place in Vic that its too soft for is phillip island... so unless your going to be hitting PI often the Bilstein whiteline combo is great!

I have never driven on the Tein super streets or the G4 stuff but I can tell you buying 'adjustable' coilovers is a waste of time... do some more reading on shock technology and handling and you will see what I mean

I have the SK group but stuff in my car and the only place in Vic that its too soft for is phillip island... so unless your going to be hitting PI often the Bilstein whiteline combo is great!

I have never driven on the Tein super streets or the G4 stuff but I can tell you buying 'adjustable' coilovers is a waste of time... do some more reading on shock technology and handling and you will see what I mean

I have the Bilstien setup also however I have slighter stiffer spring rates than the SK GB. Car goes pretty well, just need to learn how to drive it consistantly at DECA :laugh:

my issues is the stock diff now. 1.5 way comming my way soon.

Tein: Great Japan quality. If bought through Fulcrum, they are re valved/sprung for Australian roads.

G4 Racing: Cheaper quality, not sure where they are made. Will not perform as good, in the long run.

Even though the SK gb kit are great, i still prefer my adjustability. I like the thought of adjusting the stiffness for various roads, events, conditions, etc. And the Tein EDFC makes it soooooooooooooooo much easier :D

I have the SK group but stuff in my car and the only place in Vic that its too soft for is phillip island... so unless your going to be hitting PI often the Bilstein whiteline combo is great!

I have never driven on the Tein super streets or the G4 stuff but I can tell you buying 'adjustable' coilovers is a waste of time... do some more reading on shock technology and handling and you will see what I mean

I disagree with the coilover statement, height and dampener adjustment is very useful. Height is good for raising if the cops pin you and dampenr is great for fun/track days and other events.

Lance - What are you looking to get from your car? What will you be using it for?

Mate I was raped by Pettett last week and he was picking on my ride height. Now I know for a fact that it's sitting at 110mm at the pipe (lowest point) but he STILL gave me a hard time about it. The fact I can raise the car for testing is priceless. All you need is one assho|e cop like him and you'd have to get a lot more work done to raise non adjustable suspension. Now I know you'll say "make it legal ride height and you'll have no issues" but we both know that aint the case huh.

All I'm saying is the SK group buy for instance is almost the cost of a set of Tien Super Street (Fulcrum local stuff). I'm about to change my suspension and I know what I'll be choosing.

fair enough then!

yep you have to take the Bilsteins out to reset the height... but I have never been pulled over let alone hassled about ride height... I have mine set pretty high though, otherwise the tires scrub really badly on the rear guards... you should move away from Knox!

Mate I was raped by Pettett last week and he was picking on my ride height. Now I know for a fact that it's sitting at 110mm at the pipe (lowest point) but he STILL gave me a hard time about it. The fact I can raise the car for testing is priceless. All you need is one assho|e cop like him and you'd have to get a lot more work done to raise non adjustable suspension. Now I know you'll say "make it legal ride height and you'll have no issues" but we both know that aint the case huh.

All I'm saying is the SK group buy for instance is almost the cost of a set of Tien Super Street (Fulcrum local stuff). I'm about to change my suspension and I know what I'll be choosing.

I know you've been raped... more than once... :)

lol

Ye i know that, but if you are sitting 110mm, why are you even raising it?

Your legal to begin with!

ive got tiens and they are pretty stiff.. but id rather a stiff ride (yeh i know that sounds gay) over bodyroll anyday

Only thr Jap Spec are stiff.

If you bought them through Fulcrum they would be ALOT better and comfortable. Yet the still have enough dampner ajdustment to make them pretty damn stiff.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...