Jump to content
SAU Community

Recommended Posts

I still love my Stagea but have to get some bigger wheels to fill up the guards.. it came with 17's..they look way too small..I know 18' fit with no probs but I am wondering how much bigger I could go (in total) before it would become problematic.I know I am restricted buy what will physically fit ...but a what stage would it start to affect performance/acceleration.

My logic tells me a larger overall wheel/tyre would decrease acceleration..and show a slower speed than reality...????

I am not thinking stupidly big....18's or 19's with a larger side wall profile is what I am thinking of.

Cheers

Scott.

Link to comment
https://www.sau.com.au/forums/topic/169024-how-big-can-i-go-wheels/
Share on other sites

tub the wagon and run 30's, bling bling!!

(make it lower than grants too)

seriously however.. i know 235/35R18's fit, as thats what kylie has, and id imagine a 19 would fit easy with the amount of guard clearance there is left.

is yours lowered? that can affect rim size too.

also, larger wheels make you travel FASTER than what your speedo indicates, as the larger rolling diameter has a greater circumference, and travels a further distance over 1 rotation.

I know fuzzy had 19's on previously but now has 18's but im not sure what widths his 19's were.

On mine at the moment i have 18 by 8.5 all round but on my previous rims which were works on the back i had 18 by 9 and my Stagea is lowered also and i had no drama's

I know fuzzy had 19's on previously but now has 18's but im not sure what widths his 19's were.

they were 19x8.5 ... fitted up easily without any probs.

Has anyone fitted 20's here?? I'd be interested to know how fitment went, well and what ride quality/fuel eco is like.

Edited by -FUZZY-

personally 17" are the best riding and most economic in terms of tyre prices. Once you get through to 18" prices jumped by almost 50%.

I found that 18" its ok and looks good. Trade off is the price and the ride quality especialy going over train tracks and shitty rural roads.

Perhaps Sk could clarify this. Between 17" and 18" tyres which one got more traction? In terms of pick up? My guess is 17" would fair better in terms of traction and pick u speed.

doesnt matter

my 18s have the same rolling diameter of stock

its all in your tire width selection and sidewall

Ill make it short and sweet

you have to answer two question

Do you want stock fenders and no rubbing

or

are youw illing to use a fender roller (or pipe) to flare the rears

and

is this purely for performance advantage

or

looks as well

Ill base what you should run based on those answers so i dont write another book

i've got a set of rims that measure 18 * 9.5 +32 on the way with 265/40 18's ..will tell you if they wayy too big when i get the wheels and fit them on.

easy fit.

personally 17" are the best riding and most economic in terms of tyre prices. Once you get through to 18" prices jumped by almost 50%.

I found that 18" its ok and looks good. Trade off is the price and the ride quality especialy going over train tracks and shitty rural roads.

Perhaps Sk could clarify this. Between 17" and 18" tyres which one got more traction? In terms of pick up? My guess is 17" would fair better in terms of traction and pick u speed.

id imagine 17's would have a slight advantage over 18's, due to a slightly larger sidewall, and usually lighter rims, and also majority of the weight being closer to the hub. however its probably not even noticable

aslong as you dont buy some cheap ass cast iron 19" chromies, you should be right. :)

doesnt matter

my 18s have the same rolling diameter of stock

its all in your tire width selection and sidewall

Ill make it short and sweet

you have to answer two question

Do you want stock fenders and no rubbing

or

are youw illing to use a fender roller (or pipe) to flare the rears

and

is this purely for performance advantage

or

looks as well

Ill base what you should run based on those answers so i dont write another book

easy fit.

it may have the same rolling diametre, but the rim itself is likely to be heavier, and have more weight further from the hub, thus affecting its ability to be rotated.

id imagine 17's would have a slight advantage over 18's, due to a slightly larger sidewall, and usually lighter rims, and also majority of the weight being closer to the hub. however its probably not even noticable

aslong as you dont buy some cheap ass cast iron 19" chromies, you should be right. >_<

it may have the same rolling diametre, but the rim itself is likely to be heavier, and have more weight further from the hub, thus affecting its ability to be rotated.

so turn up the boost wimp.

if you view a 5 or 6lb a wheel diference a weakness.....then sure you can put it like that

everything has a trade off

wheels are a small amount of the entire picture

thats why d1 guys have more HP i guess

to pull around those big wide wheels, and all taht heavy aero and rollcages

if you view a 5 or 6lb a wheel diference a weakness.....then sure you can put it like that

everything has a trade off

wheels are a small amount of the entire picture

thats why d1 guys have more HP i guess

to pull around those big wide wheels, and all taht heavy aero and rollcages

dont forget wieght is one of the factors ehich is important in racing. In prro racing the would prefer to up the hp without upping the wieght.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...