Jump to content
SAU Community

Looking At Buying An R34 Gt-t From Sydney And Bringing It Home To Adelaide!

{AMO}

By {AMO},
in South Australia

 Share

Recommended Posts

{AMO} Collaborator

{AMO}

Posted
Posted (edited)

Hey Guys and Gals I am looking within the next month of flying over to sydney and picking myself up an R34 GTT and bringing it back home to Adelaide, anyone that has done this with jap cars b4 please post with ur experiences as to what is involved and any problems that may occurr i have been told by a few people that the process is quite simple and involves just a quick engine number etc check at a cop shop and your done.

any info at all would be much appreciated thanx guys!!!!

Aaron {AMO}

Edited by {AMO}
raz0r$harP.UK Grand Master

raz0r$harP.UK

Posted
Posted

It's more than a rego check.

If it's not in your name already in NSW, you need to go for an identity check. And if you live within 40km of the Adelaide GPO it MUST go to Regency, well that's what the link below says ...

http://www.transport.sa.gov.au/registratio...egistration.asp

/2on Proficient

/2on

Posted
Posted

I bought my car from vic, all you got to do is get a identity check done if the car isn't registered in your name, i had mine done the Sturt cop shop and they weren't to bad there but there heaps picky about window tinting as long as the cars pretty stockish you should be fine

Tangles Grand Master

Tangles

Posted
Posted

no you DONT have to go to Regency. well at least that was the case around 2yrs ago.

you can have it identified and inspected at the Sturt Road depot next to the police station..... on Tues and Thurs only between 9am and 3pm

make sure it is stock at time of identity inspection, have all your paperwork with you at the time, and it'll be fine.

Evil34 Experienced

Evil34

Posted
Posted

Sturt cop shop does not offer this facility anymore and you have to go to the regency inspection centre at regency park.

It is a place arounf the corner from where they do the defects, and they will go over your car pretty well checking for leaks and the like.

If you have anything obviously defectablre you will not be able to get through, they are cracking down on this type of thing pretty heavily.

I had top take my 34 through there in november last year and got through fine with just an exhaust.

They questioned my window tint, but it is actually privacy glass, so they had to let me go.

It can be pretty nerve racking though.

Whiplash Grand Master

Whiplash

Posted
Posted
Sturt cop shop does not offer this facility anymore and you have to go to the regency inspection centre at regency park.

It is a place arounf the corner from where they do the defects, and they will go over your car pretty well checking for leaks and the like.

If you have anything obviously defectablre you will not be able to get through, they are cracking down on this type of thing pretty heavily.

I had top take my 34 through there in november last year and got through fine with just an exhaust.

They questioned my window tint, but it is actually privacy glass, so they had to let me go.

It can be pretty nerve racking though.

Its not done at the cop shop it is done in the council depot next door on Wednesday's and Thursday's 9 - 3.30 with a lunch break at 12 - 12.30.

unfortunately i'm only authorized to do these identity check for vehicles going into our companies name otherwise i would be happy help out.

It is really easy and fast, they will check your tint and make you take off your front windows if it doesn't pass. You can stand around for a while if you go thee first thing in the morning. If you live out north regency would be just as easy, i haven't had any issues with any of these placed in the last 3 years i have been doing my job. but then again i only deal with Aussie delivered cars....

andz Mentor

andz

Posted
Posted (edited)
Why not get a SA R34 GTT..... ??

if you want to pay up to $5000 extra :thumbsup:

I flew to syd and drove the car back (make sure u get a 'cover note')

Regency took 10mins and gave it the ok, depends on the car of course

Edited by andz69
Howie Grand Master

Howie

Posted
Posted

Got my 34gtt from victoria.. just went to regency (vehicle identity check)... had to be dead stock when presented. then went to rta with a slip saying i purchased from who and at what price and it was then in my name. pretty straight forward.

Mr Sniper911 Community Regular

Mr Sniper911

Posted
Posted
if you want to pay up to $5000 extra :)

I flew to syd and drove the car back (make sure u get a 'cover note')

Regency took 10mins and gave it the ok, depends on the car of course

What are they worth over there?

slimjim Collaborator

slimjim

Posted
Posted

When I bought mine over from Sydney it just needed an ID check at Regency, but make sure your car has a green compliance plate in the engine bay.

Mine only had a black NSW Vehicle Modification plate, which doesn't count for anything in SA. So it had to go over the pits for a full inspection.

Just my experience, this was December 05.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...