Jump to content
SAU Community

Recommended Posts

Hi guys,

GT-R's been 100% fine. I have a completely DEAD battery due to the car being in the workshop for afew months, but a very strong battery jump starter which I have been using to start the car up for times when I need to move it.

I was doing a few things the other day:

1) Replacing the 180km/hr cluster with a 320km/hr cluster.

2) Putting back the plastic panel over my Power FC ECU.

3) I removed a unit/box that looked like an ecu thing which was found behind the driver side rear 1.4 trim.

And when I went to start the car up, it cranks but the engine does not fire up!!!

- Immobiliser wires have been checked, and immobiliser seems to switch off (red light turns off when de-activiating it). Car cranks so this means it's not the immobiliser?

- I put the ecu/unit/box behind the driver side rear 1/4 back in. I still do not know what this unit is. I thought it was a stereo AMP or something?

- I took off thw plastic panel over the Power FC ecu and checked all wires in case I damaged something back there, everything seems fine.

- Replaced spark plugs just in case, everything seems fine.

- Checked fuses, do I check every single one of them?! The ones I did check under the steering wheel, seem fine.

Car still will not start, cranks and cranks but does not fire up!

Any suggestions would be greatly appreciated. Really confused!

Link to comment
https://www.sau.com.au/forums/topic/169060-r32-gt-r-will-not-start/
Share on other sites

Guys it was this little unit which godzl1975 pointed out as the fule pump modulator. Plugging it back in wasn't enough, we had to re-mount it on the chassis before the car would start! IE: It had to be properly grounded in order to work. Amazing how such a silly small thing stopped the whole car from starting and caused us to do so much head scratching, not to mention taking the dash apart, ECU and replacing spark plugs!!! :)

Yeah i unbolted it but left it plugged in (can't erember why but sure enought he car wouldnt start till i screwed it back down. I 2nd the statement about removing things after you learn what they do. Many people under estimate the complexity and technology built into these awesome machines.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This is the LCA mount reloctaion kit. Self explanatory in its description. https://au.gktech.com/products/s13-180sx-r32-subframe-anti-squat-reduction-weld-in-kit?_pos=62&_fid=1e812d392&_ss=c These are the alloy subframe bush inserts that I am using. I like them. https://au.gktech.com/products/rear-subframe-slip-in-collars?_pos=29&_fid=1e812d392&_ss=c Alternatively, if you have original and shitty bushes, you might consider outright replacement with poly. https://au.gktech.com/products/polyurethane-rear-subframe-bushes?_pos=28&_fid=1e812d392&_ss=c I would also higly recommend that you look into adjustable RUCAs and tension rods, so you can sort out the camber and bump steer behaviour, especially if the car will be any more than ~15mm lower than stock. I would also highly recommend the GKTech FUCAs, although you really should do some research and learning on the subjetc of R32 FUCAs before making any decisions. All of this will be criticaly difficult to get through a TÜV inspection too, if that happens to be relevant to you. Note that if you do install the relocation kit, you will absolutely have to replace the associated bushes with spherical joints (you can read all about that on the product page) or upgrade the LCAs also.
    • I picked up my block and head last week and have been slowly assembling it since then. Pictures I took earlier this week. The rest of the auxiliaries are on now. I just have my intake manifold runners to tap for my WMI direct port setup before putting it back on. I should hopefully have the motor back in by this weekend.   
    • I couldn't agree more. As an owner of a built high HP skyline, I'd be a hypocrite to not buy a Hummer for the reasons you listed though haha. 
    • Hahaha oh shit! Again!
×
×
  • Create New...