Jump to content
SAU Community

Recommended Posts

Ok, I had a search and found a crap thread on this.. which didn't help me at all.. So I thought i'd take the effort in starting a thread which hopefully can be stickied.

Once the correct info is posted in reply to this thread I will change this first post into a little write up.

1. definitively clear up which bulb types are used for the R32 head light

post-19264-1179472536_thumb.jpg

Which bulbs are used for 1, 2, 3 and 4?

2. Provide a proper (picture) guide of how to take off the head lights.

How do you take the head lights off? There are a total of 4 bolts is which i gather? And is it necessary to take the front bar off?

Cheers, Ben.

Link to comment
https://www.sau.com.au/forums/topic/169205-r32-headlights/
Share on other sites

Ok so anyone want to clear up what types of head lights there are and the differences in bulbs? adams is H3C and rekin's is H1?

How do you tell which type of head light it is if they look the same etc etc? I will try and post pictures of the older r32 headlights so we can clear that up too..

And still need to know how to take the headlights out.. and if the removal of the front bar is absolutely necessary...

Cheers, Ben.

Link to comment
https://www.sau.com.au/forums/topic/169205-r32-headlights/#findComment-3130544
Share on other sites

Ok.. heres some photo's which may help..

This picture is of the old style R32:

post-19264-1179653738_thumb.jpg

And as for removing the headlights..

post-19264-1179653667_thumb.jpg

I'm assuming you have to remove these dam head lights to replace bulbs as theres no room for you to do so with them in place.

Also:

For bulb reference:

post-19264-1179653802_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/169205-r32-headlights/#findComment-3130584
Share on other sites

Ok so anyone want to clear up what types of head lights there are and the differences in bulbs? adams is H3C and rekin's is H1?

There is no easy answer for that question.

Some people have H3, H3C and H1's.

Probably changed lights during the age of the car.

Mines October 1993 so it was one of the last made before production finished. As there are no 1994 R32's.

My friends 1989 R32 had h3c globes.

Anyone with a series 2 R32 (1991-1993) have H3C or H1?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/169205-r32-headlights/#findComment-3131202
Share on other sites

sept 92, H1's.

There is an easy answer. Check what you have before buying new ones. If the light doesn't work and it's day time, it doesn't hurt spending 5 minutes to remove it before driving to the parts place.

The bulbs can be accessed while the lights are on the car.

Link to comment
https://www.sau.com.au/forums/topic/169205-r32-headlights/#findComment-3131311
Share on other sites

sept 92, H1's.

There is an easy answer. Check what you have before buying new ones. If the light doesn't work and it's day time, it doesn't hurt spending 5 minutes to remove it before driving to the parts place.

The bulbs can be accessed while the lights are on the car.

Removing/Replacing headlight globe for R32;

http://www.skylinesaustralia.com/forums/in...c=16147&hl=

Link to comment
https://www.sau.com.au/forums/topic/169205-r32-headlights/#findComment-3131350
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...