Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

where do i buy all the brake pads everyone has posted about?

besides bendix, you can get them from the milkbar.. its time for a brake change dnt know what to get..

More people are talking shit about bendix pads rather then posting whats good and whats not..

Could people post where to find because i cant find shit..

  • 2 weeks later...

Hey everyone, this is more of an enquiry than anything else, but I compete in motorkhana's, hillclimbs and sprints and I was looking at getting th QFM pads. I was really wanting to get the 750 degree ones for their track use but I would need cold bite for the motorkhana's and such. Should I just get the 550 degree ones or would the 750's do the cold job alright. one last thing is how bad is the squeel?

P.S. I also have a R32 Type M GTS-T and I heard that they are the same calipers and pads as the non-brembo GT-R's

Edited by TURISMO
  • 2 weeks later...

hey im considering on buy ferodo DS2500 for street use only and maybe 1 track day, but need a product identification number or a place where i can goto to buy them if i cant find a place i will have to get the bendex ultimates

PS: the guys at supercheap autp ask if i could get a product id number/serial as they couldn't find the pad on system :S

hey im considering on buy ferodo DS2500 for street use only and maybe 1 track day, but need a product identification number or a place where i can goto to buy them if i cant find a place i will have to get the bendex ultimates

PS: the guys at supercheap autp ask if i could get a product id number/serial as they couldn't find the pad on system :S

Super cheap won't be able to get the DS2500. That is the product ID. The ferodo racing pads aren't imported into australia by the same group that do the regular street pads...

If its 99% street use, then don't waste your money on the DS2500's anyway. TRW Lucas or EBC Green stuff are equally as good (all about 650 degrees rated), or if you were going to settle for Bendix Ultimate, then something like a QFM HPX, both at 550 will give you the same performance minus the rotor wear and dust of the former.

Just a quick comment if you are thinking Greenstuff, they are worthless for any track days as they disintegrate quickly, and EBC don't recommend them for heavier cars for track days themselves.

Also they throw a lot of dust which is annoying. I have them in the V8 Soarer as they were supposed to be low dust, but that was wrong. They are also spongy under the pedal and lack progressive feel.

Otherwise there are plenty of good pads, but I'll never buy EBC again.

My 20 cents

Track Only Pads

Hawke HT10, our race team pad of choice for ther last 5 years * *

Hawke DTC60, the new compound, slightly higher CoF with better initial bite than the HT10 * * *

Hawke DTC70, the new compound, even more initial bite than the DTC60, can be a proble if you don't have good driver control of brake modulation * *

On some cars we use a split (DTC70 front and DTC60 rear) to give more resistence to rear brake lock up on sharp application.

Ferodo DS3000, hard on rotors, not as good initial bite as HPC60, good high temperature pad *

Ferodo DS2500, not really a race compound, OK for wet races and cold weather, not as good at high temp as 3000's :D

Performance Friction Carbon Metallic * *

Our previous brake pad of choice, choose the compound carefully, but be aware of rotor build up.

Endless, Overpriced for what they are :D:(

Combo Track/Street Pads

Hawke HP Plus, the best track street compromise, can be noisy if the rest of the hardware is worn or they are not installed and run in correctly * *

Bendix Ultimate, very dusty, but good for light track work if the rest of the hardware is in tip top condition *

Ferodo 2000, better high temp control than Ultimates, still testing their road suitability *

Endless, way overpriced for what they are :P

Ferodo DS2500, sit in middle, an OK street pad and an OK circuit pad *

Street Only Pads

Bendix Ultimates, dusty but effective, need initial warming up on a cold winters day *

Ferodo 2000, better for sustained high temp work, still testing their overall road suitability *

Hawke HPS, the best high performance street pad, good life, can be noisy if the rest of the hardware is worn or they are not installed and run in correctly * *

Hawke LTC, the best low dust pad I have tried, still good braking power * * *

Cheers

Gary

  • 2 weeks later...

have you tried QFM pads Gary??

There is a group buy going for ADR approved braided lines and QFM pads, $330 or something like that, seemed like a real good deal but haven't heard of QFM before....

Heyy guys, its time for me to change/upgrade my breaks... I'm thinking to go for bendix ultiamate all around. However i want to change my stock disks as well... any help will be great. I'm from melb so if anyone knows any shops that are good, plz PM me their address and number. thankx

goto repco in moorabin or hoppers. they had the ultimates for the cheapest. it seems to vary heaps from store to store.

Thanks man.. I'm from hoppers anywayz so its around the corner for me... what do ur oppinion on cross drill disks?

Were to buy, how much and what i should get?

  • 2 weeks later...

I think the Ultimates are hard to judge. Personally have had 3 sets with no problems, 4th set is irritating me though - noise like nothing else. I think it's just their QC, they are mass-mass produced and they'd have variances. Meh. I get em under $90 so it's all good (too bad I can get DBA4000s for that price... they're not looking as good these days).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Could be. Could also be that they sit around broken more. To be fair, you almost never see one driving around. I see more R chassis GTRs than the Renault ones.
    • Yeah. Nah. This is why I said My bold for my double emphasis. We're not talking about cars tuned to the edge of det here. We're talking about normal cars. Flame propagation speed and the amount of energy required to ignite the fuel are not significant factors when running at 1500-4000 rpm, and medium to light loads, like nearly every car on the road (except twin cab utes which are driven at 6k and 100% load all the time). There is no shortage of ignition energy available in any petrol engine. If there was, we'd all be in deep shit. The calorific value, on a volume basis, is significantly different, between 98 and 91, and that turns up immediately in consumption numbers. You can see the signal easily if you control for the other variables well enough, and/or collect enough stats. As to not seeing any benefit - we had a couple of EF and EL Falcons in the company fleet back in the late 90s and early 2000s. The EEC IV ECU in those things was particularly good at adding in timing as soon as knock headroom improved, which typically came from putting in some 95 or 98. The responsiveness and power improved noticeably, and the fuel consumption dropped considerably, just from going to 95. Less delta from there to 98 - almost not noticeable, compared to the big differences seen between 91 and 95. Way back in the day, when supermarkets first started selling fuel from their own stations, I did thousands of km in FNQ in a small Toyota. I can't remember if it was a Starlet or an early Yaris. Anyway - the supermarket servos were bringing in cheap fuel from Indonesia, and the other servos were still using locally refined gear. The fuel consumption was typically at least 5%, often as much as 8% worse on the Indo shit, presumably because they had a lot more oxygenated component in the brew, and were probably barely meeting the octane spec. Around the same time or maybe a bit later (like 25 years ago), I could tell the difference between Shell 98 and BP 98, and typically preferred to only use Shell then because the Skyline ran so much better on it. Years later I found the realtionship between them had swapped, as a consequence of yet more refinery closures. So I've only used BP 98 since. Although, I must say that I could not fault the odd tank of United 98 that I've run. It's probably the same stuff. It is also very important to remember that these findings are often dependent on region. With most of the refineries in Oz now dead, there's less variability in local stuff, and he majority of our fuels are not even refined here any more anyway. It probably depends more on which SE Asian refinery is currently cheapest to operate.
    • You don't have an R34 service manual for the body do you? Have found plenty for the engine and drivetrain but nothing else
    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
×
×
  • Create New...